LINAX - Model PQ3000 - Transparent Monitoring of Power Quality and Energy Consumption

The modern, multi-lingual design and the high-resolution colour TFT display support the user in data analysis on site. The integrated webserver allows remote access to all measured data and the parameterization of the device. The device provides a wide functionality, which can be extended further by means of optional components.

• Certified power quality analysis, class A acc. IEC 61000-4-30 Ed. 3
• Standardized data format for power quality data: PQDIF
• Energy consumption analysis, class 0.5S (meters, load profiles, trend analysis)
• EN50160 conformity reports via SMARTCOLLECT PM20
• On-site event display
• Direct measurement up to 690V, CATIII
• Condition monitoring
• Limit monitoring with alarming
• Universal process I/O
• Graphical measurement displays
• High resolution color TFT display
• Standard I/Os (1 digital input, 2 digital outputs)

• Device parameterization via WEB browser 
• Firmware update 
• Measurement display (http) 
• Remote acquisition of measurements via control system (Modbus/TCP)
• Service and maintenance

LINAX PQ3000 stores the acquired power quality data in the standardized Power Quality Data Interchange Format (PQDIF) according to IEEE 1159.3. Using the SMARTCOLLECT PM20 software the content of these files can be displayed, stored in a database and analyzed. A conformity report can be prepared as well.

Using the link www.pqview.com/pqdiffractor the free of cost software PQDiffractor of Electrotek Concepts may be downloaded (registration required). By means of this software data of the PQDIF files can be analyzed, saved in CSV format or exported as a graphic.

Modbus/RTU interface

For remote acquisition of measurements via control system

Extensions
Three extension can be implemented in the device. You may select from:

• 2 relay outputs
• 2 analog outputs ±20mA 
• 4 analog outputs ±20mA
• 4 S0 digital inputs active
• 4 S0 digital inputs passive
• Fault current detection
  Each fault current module provides two channels for monitoring differential or fault currents in earthed AC current systems. In any case measurement has to be performed via suitable current transformers, a direct measurement is not possible.
• Time synchronization via GPS
  Very accurate time synchronization of the measurement device using a preconfigured GPS receiver (accessory).
• Uninterrupted power supply (UPS)
  Provides power supply for five times 3 minutes if power fails
• IEC61850 interface

• Documentation on USB stick
• Current Transformers 
• GPS receiver, configured