LINAX - Model PQ5000 - Transparent Monitoring of Power Quality and Energy Consumption
From Power System Monitoring - Power Quality
The LINAX PQ5000 combines the characteristics of a power quality measurement device with functions for comprehensive energy consumption and condition monitoring. The integrated webserver allows remote access to all measured data and the parameterization of the device. The device provides a wide functionality, which can be extended further by means of optional components.
Functions
- Certified power quality analysis, class A acc. IEC 61000-4-30 Ed. 3
- Standardized data format for power quality data: PQDIF
- Energy consumption analysis, class 0.5S (meters, load profiles, trend analysis)
- EN50160 conformity reports via SmartCollect PM20
- On-site event display (with option TFT display)
- Direct measurement up to 690V, CATIII
- Condition monitoring
- Limit monitoring with alarming
- Universal process I/O
- Graphical measurement displays (with option TFT display)
- Standard I/Os (1 digital input, 2 digital outputs)
Ethernet interface
- Device parameterization via WEB browser
- Firmware update
- Measurement display (http)
- Remote acquisition of measurements via control system (Modbus/TCP)
- Service and maintenance
Modbus/RTU interface
For remote acquisition of measurements via control system
Data Analysis
LINAX PQ5000 stores the acquired power quality data in the standardized Power Quality Data Interchange Format (PQDIF) according to IEEE 1159.3. Using the SMARTCOLLECT PM20 software the content of these files can be displayed, stored in a database and analyzed. A conformity report can be prepared as well.
Using the link www.pqview.com/pqdiffractor the free of cost software PQDiffractor of Electrotek Concepts may be downloaded (registration required). By means of this software data of the PQDIF files can be analyzed, saved in CSV format or exported as a graphic.
Options
High resolution color TFT display (320x240px)
- Graphical measurement displays
- Multi-language operation
- Full device parameterization
Uninterrupted power supply (UPS)
Provides power supply for five times 3 minutes if power fails
Extensions
Two extensions can be implemented in the device. You may select from:
- 2 relay outputs
- 2 analog outputs ±20mA
- 4 analog outputs ±20mA
- 4 S0 digital inputs active
- 4 S0 digital inputs passive
- Fault current detection
Each fault current module provides two channels for monitoring differential or fault currents in earthed AC current systems. In any case measurement has to be performed via suitable current transformers, a direct measurement is not possible. - Time synchronization via GPS
Very accurate time synchronization of the measurement device using a preconfigured GPS receiver (accessory). - IEC61850 interface
Accessories
- Documentation on USB stick
- Current Transformers
- GPS receiver, configured
Customer reviews
No reviews were found for LINAX - Model PQ5000 - Transparent Monitoring of Power Quality and Energy Consumption. Be the first to review!