Linka - Straw Heating Plant: 1,000 - 15,000 kW
From Heating Plant
here are several ways of constructing a straw system for a heating plant, depending on the customer’s requests and needs. Linka uses three basic construction methods, based on the chosen boiler size. All our plant sizes from 1000 to 15,000 kW can be built with a straw shredder. Due to the large quantity of straw, the feeding system can either be built with 2-3 levels of conveyors, from where the bales are lifted to the shredder by an elevator. Alternatively we can install a straw crane which transports the bales to the shredder.
-
Most popular related searches
Plant sizes from 1,000 to 3,000kW are basically bu...
Plant sizes from 1,000 to 3,000kW are basically built as small outdoor plans, with a straw shredder. When large quantities of straw are to be burned, a feeder system with belts at 2 or 3 different levels can be installed with an elevator to lift the bales down to the shredder. Alternatively, a straw crane can be installed which brings the bales to the shredder.
As an alternative, plant sizes from 3,000 to 8,000 kW can be constructed with a straw cutter as feeder unit. A common solution is to install a traverse crane in the barn, which picks up the bales and transports them to a safety box, also located in the barn. The bale will be hydraulically fed into the cutter which turns the bale onto its edge before a slice is cut off (also hydraulically) and fed into the boiler for incineration.
For plant sizes larger than 8,000 kW we can deliver a system, based on “the cigar principal”. In this case a crane and safety box is also used. The bale is moved by hydraulic into a drawer, which is placed offset by a bale’s width. When the drawer closes the bale is directly aligned with the boiler inlet, and is slowly fed into the boiler as it incinerates.
Customer reviews
No reviews were found for Linka - Straw Heating Plant: 1,000 - 15,000 kW. Be the first to review!