Low Voltage Panelboards
From Power Distribution
IEM panelboards are designed to meet the needs of any electrical distribution system. Lighting, Distribution, and Receptacle Panelboards are custom engineered products designed to meet specific customer needs. Standard panelboard configurations are also available.
Features
- Voltage: Up to 600Vac, 250Vdc maximum
- Ampacity: 100A to 600A
- 65kA at 480V maximum
- UL listed CSA listed
- Single phase and three phase
- Series ratings with upstream devices
- Main breaker, main lugs, subfed breaker - optional
- Vertically mounted main and sub-feed circuit breakers
- Up to 84 circuits in one panel
- Interiors available in silver plated copper or tin aluminum bus
- Complete line of UL listed interiors with 200% rated neutrals for non-linear loads
- Surge Suppression Equipment/Optional integrated TVSS
- Configured for sequence phase connections allowing complete flexible circuit arrangement (1-, 2- or 3-poles) to properly balance the electrical load on each phase.
- Lock and door opening mechanism includes a positive slide catch and right- or left-hand installation.
- Multi section boards – bolted together and bushed openings (horizontal and vertical)
- Standard or door in door trims
- ANSI 61 light gray standard finish, other colors available as option
- Stainless steel and aluminum available
- Up to 150A branch breakers
PIU Panelboards
- Voltage: Up to 480Vac, 250Vdc maximum
- Ampacity: 100A to 600A
- 65kA at 480Y/277Vac
- 65kA at 240V
- UL or CSA listed
- Single phase and three phase
- Main breaker, main lugs, subfed breaker optional
- 10K thru 65K SCCR (AIC) – interrupting capacity
- Vertically mounted main and sub-feed circuit breakers
- Up to 84 circuits in one panel
- Interiors available in silver plated copper or tin aluminum bus
- An interior accepts bolt-on or plug-on branch circuit breakers
- Complete line of UL listed interiors with 200% rated neutrals for non-linear loads
- Surge suppression equipment/optional integrated TVSS
- Configured for sequence phase connections allowing complete flexible circuit arrangement (1-, 2- or 3-poles) to properly balance the electrical load on each phase
- Lock and Door opening mechanism includes a positive slide catch and right- or left-hand installation
- Multi section boards – bolted together and bush openings (horizontal and vertical)
- Standard or door in door trims
- ANSI 61 light gray standard finish, other colors available as option
- Stainless steel and aluminum available
- We offer Title 24 panels for disaggregation of loads
- Up to 100A branch breakers
CDP Panelboards
- Voltage: Up to 600Vac, 250Vdc maximum
- Ampacity: 250A to 1200A
- UL or CSA listed
- Single phase and three-phase
- 10K thru 200K SCCR (AIC) – Interrupting Capacity (100kA at 480V, 200kA at 240V)
- Series ratings with upstream devices
- Interiors available in plated copper or aluminum bus
- Main breaker or main lugs
- Fully rated or series rated
- Selection includes most commercially available molded case circuit breakers from industry leading manufacturers
- Standard or door in door trims
- ANSI 61 light gray standard finish, other colors available as option
- Stainless steel and aluminum available
Features & Benefits
Fully rated bus is based on density ratings, not UL heat rise tests, resulting in more bus and lower operating temperatures.All enclosures are finished using a state-of-the-art powder coating system providing an indoor finish that exceeds the 1500 hour salt spray testing requirement for outdoor equipment to 3000 hours.Component and metering selections are based on value engineering for the application and optimized to meet specifications.
Technical Specifications- IEM Switchgear meets or exceeds all ANSI, IEEE, and NEMA standards applicable to metal clad switchgear including C37.20, C37.20.2, C37.20.3, C37.55, C37.57, and NEMA SG-4.
- NEMA 1 and NEMA 3R enclosures
Customer reviews
No reviews were found for Low Voltage Panelboards. Be the first to review!