Mawera - Model PS Series - Cone-Bottom Silo Reclaim System
The MAWERA cone-bottom silo reclaim system provides consistent discharge of wood particles without bridging problems. Material such as sawdust, planer shavings, wood chips and fines may be used. A spiked screw revolving around its own axis draws the material to the bottom of the cone. At the same time the spiked screw rotates inside the cone, effectively removing cavities that may have been formed between the cone and the material. The screw is sized to reach the silo-wall. Once the material has reached the chute at the bottom of the cone, it is passing though a cellular wheel sluice. This sluice acts like an air lock, avoiding influx of air and moisture into the silo. Finally a fixed or variable speed screw conveys the material further.
-
Most popular related searches
Key Advantages:
- definetely no bridging - even with silo of less than 16´(5m) diameter
- no risk of overloading the silo: the screw pivots round the universal joint and finds the angle/way of least resistance thereby avoiding “force feeding”
- the 45° angle of the reclaim screw allows homogenously mixing of material layered inside the silo
- the cone-shaped funnel design maximises the storage volume of the silo
- the drive, its gear, and the universal joint are accessible from the outside - no silo unloading required for service
- low power consumption
- high reliability
Technical Data:
- Possible Uses:
- Round silos diameter 7´ to 24´(2.2 to 7.5m) wall heights up to 66´(20m)
- Spiked screw: 45° diagonal
- Funnel sizes: Standard 7´3” and 10” (2.2 and 3m) optional - add-on cone from 7´3” to 12´6” (2.2 to 3.8m)
- Potential Reclaim Rate:
- 1.1kW drive: 1.8 to 4.1cfm (3 to 7m³/h)
- 3.7/4.7kW drive: 5.9 to 11.8cfm (10 to 20m³/h)
- Overload protection: Open-phase circuit breaker
Customer reviews
No reviews were found for Mawera - Model PS Series - Cone-Bottom Silo Reclaim System. Be the first to review!