MiniFlash - Model FP VISION - Flash Point Tester
From Flash Point
-
Most popular related searches
Product Details
MINIFLASH FP Vision continuously closed cup design and small sample volume of only 1-2 ml offer maximum safety. No offensive fumes are released in the testing area and little to no sample waste is registered when performing a flash point test. The fast thermoelectric cooling at the end of each flash point test plus the easy handling of the instrument also save expensive labor time.
MINIFLASH FP Vision is part of the Vision analyzer line. Vision analyzers support remote access to test results via the COCKPIT Software and are equipped with a full-color touchscreen. The touchscreen of the MINIFLASH Vision features an easy-to-use graphical interface and do away with the need for training. Any technician is capable of running a flash point test with MINIFLASH FP Vision! As other analyzers of the Vision product line, MINIFLASH FP Vision offers hassle-free communication with USB, Ethernet, LIMS and PCs and nearly unlimited storage capacity for test results.
Grabner Instruments offers two versions of MINIFLASH FP Vision: MINIFLASH FPH Vision, for high temperatures up to 400°C, and MINIFLASH FP Vision, for temperatures between -25°C and 120°C.
The flash point testers determine flash point according to ASTM D6450 and according to the advanced ASTM D7094 standard. This procedure describes the “Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP)”, which offers the highest repeatability and reproducibility and an excellent correlation to the D93 Pensky-Martens method. The official statement from the ASTM committee goes as follows: 'there is no statistically significant bias observed between ASTM D7094 and ASTM D93 Procedure A”. Also, ASTM D7094 has been approved by the ASTM committee for the Diesel Fuel and Kerosene specifications ASTM D975, D396, D2880 and D3699.
Other Applications for MINIFLASH include:
MINIFLASH DPPetrochemistry:
Flash point testing of Residuals, Sludge, Bitumen...
Fast screening of Jet Fuel, Diesel Fuel to check for eventual presence of low flash contaminants.
Advantage: high temperature range and very safe operating procedure
Pharmacy:
Flash point testing of products containing solvents like ethanol, IPA, glycerol...
Advantage: small sample volume
Transport:
Flash point testing of flammable goods to check for compliance with transport safety regulations.
Advantage: easy handling
Flavors and Fragrances:
Flash point testing of aroma products containing alcohol based solvents.
Advantage: small sample volume reduces testing costs significantly in case of expensive base products
Paints and Varnishes:
Flash point testing of solvent based paints, varnishes and enamels to determine the safest way of storage.
Advantage: small sample volume and easy to clean
Waste Disposal:
Testing of industrial waste like solids (filter slurry...) and unknown mixtures of liquid hydrocarbons.
Advantage: small sample volume, fast thermoelectric cooling in case of samples having a flash point well below ambient temperature.
Maintenance of Engines, Pumps...:
Fuel dilution in lube oils changes its viscosity and hence the lubricating properties of the oil, resulting in increased wear of mechanical parts due to higher friction which can eventually lead to serious damage and engine drop-out. Fuel dilution decreases the flash point.
Features
- Flashpoint according to ASTM D6450 (Flash-Point by Continuously Closed Cup) and ASTM D7094 (Flash-Point by Modified Continuously Closed Cup)
- FLASHPOINT COMMITTEE STATEMENT: 'There is no statistically significant bias observed between ASTM D7094 and ASTM D93 Procedure A.'), equivalent EN ISO 2719, excellent correlation to ASTM D56, ISO13736, IP170
- New methods for EN ISO 3679 and EN ISO 3680 simulation
- Dilution Flashpoint Testing
- Go / No Go Flashpoint Testing
- Fast Screening Methods
- Automatic ignition cleaning method
- Maximum safety through Grabner continuously closed cup method (Ignition Protection Technology™)
- 1-2 ml sample size
- No Open Flame, no offensive vapors in the lab
- Highest accuracy (see precision statement)
- Extended temperature range: 0 to 400°C with external cooling (MINIFLASH FLPH TOUCH)
- Fully remote operable
- Big, color touch-screen for convenient, intuitive menu navigation
- Touch Screen Runs on Microsoft® Windows®: Full integration with network, LIMS and PC
- Hassle-free communication and data transfer via USB and Ethernet
- USB printer support
- Good Laboratory Practice: User Access Control
- Portable for Mobile and Field Use (car battery connector)
- Worldwide standard method for the flavors and fragrances industry
- Approved for the ASTM specifications of recycled fuel and biodiesel
- Short measuring time (depends on sample type) due to small sample volume of 1-2 ml
- Combustion Analysis™
- Excellent thermoelectric heating and cooling regulation through Peltier Protection Technology™
Options/Accessories
Printer recommended
Customer reviews
No reviews were found for MiniFlash - Model FP VISION - Flash Point Tester. Be the first to review!