Model 40,000 PXV - Variable Speed Crane Mounted Powerhead Crane Mounted Auger Drives
From Crane Mounted Auger Drives
The Autoguide 40,000 PXV is widely used throughout the telecom and utility industry for installing telecom and LV poles. As standard, the unit is supplied with a 12” Rock Ripper auger offering great performance in all conditions.
-
Most popular related searches
Product Details
This unit has been proven over many years of hard use within the telecom industry. It offers both high torque for tough conditions as well as a fast free spin quickly removing the spoil or sticky clay without the user ‘scraping ‘ the auger clean. This light weight unit can be fitted to lorry loaders from 7T/M and the auger flight can be removed should more lifting capacity be required. The system is normally permanently mounted to ensure the variable speed motor is free from the opportunity of contamination. There is also a relief valve to protect the motor. With the addition of a stay drive tube the unit can also install PISA anchors or screwed stays.
ROPE WIND UP
The rope wind up system is offered as standard with the 40PXV.This simple system allows the Powerhead and Auger to be stowed along the crane boom keeping the lifting hook free for use. The permanently mounted frame holds the latch, rope and safety stop. The auger shaft or extension is used to wind the auger into its stowed position.
For Pole Erection Units (PEU) the crane and Powerhead are usually stowed along the body and often on the head board. The body of the powerhead and a specially designed bracket can be used to lock the crane in the position to comply with current regulations for crane stowage.
Specification
- Total Weight 300kg
- Torque 10,000 Nm
- Speed 60 RPM
- Flow 25-50 l/min
- Pressure 275 BAR
- Maximum Auger 15'
- Excavator Size 7 t/m - 12 t/m cranes
Customer reviews
No reviews were found for Model 40,000 PXV - Variable Speed Crane Mounted Powerhead Crane Mounted Auger Drives. Be the first to review!