Model 7060 - Potentiostat/Galvanostat
From Electrochemical
Electrochemical laboratories have an increasing need for high currents instruments: batteries, fuel cells and other energy-related studies are on the leading edge of today’s research. AMEL has 40-years of experience in high power potentiostats and has always offered state of the art instruments by strictly following the electronic field advances.
-
Most popular related searches
Product Details
The Model 7060 is a powerful potentiostat available in two versions:
- ±30 V – ±12A or
- ±15V – ±25A
with all the features and advanced techniques available at your fingertip.
Some parts of this new unit are specially addressed at energy-related studies in order tomaximise the usable range of the instrument.
The unique characteristic of the 7060 to drive up to three slave units 7061 up to a huge 30 V 48 A deliverable power makes this potentiostat unsurpassed forpower and flexibility.
The connection with our FRA model 7200 under the Zassist control software, opens, to the advanced research, a window on an unexplored world in high power EIS.
The presence of RS-232 and USB interfaces allow direct connection of the system to the computer; the Junior Assist and Battery Assist software will help you in programming experiments, testing sequences and long run cycling with plenty of flexibility on both driving waveforms and data acquisition.
Specification
- Voltage (compliance) ± 30 V or ± 15 V
- Voltage (controlled range) ± 10 V
- Current ± 10 A continuous (± 12 A peak) or ± 25 A
- Voltage Resolution 400 uV
- Accuracy ± (0.2% +0.1% F.S.) worst case
- Reference Electrodes
- Input Impedance > 1 Tohm
- Input Capacitance < 50 pF
- Biasing Current < 50 pA @ 25 C°
- Common mode Rejection > 50 dB full frequency response
- Common mode Voltage Range ± 12 V
- Input BNC Outer contact grounded
- Electrochemical Techniques
- Polarisation Sweep Ramp, staircase, triangle, square wave
- Real Part Managing IR compensation
- Limits of IR compensation 0-400 % of the Rs
- Frequency Response
- Potentiostatic Bandwidth (max) 20 KHz (-3dB) resistive load (1000 Ohm)
- Galvanostatic Bandwidth (max) 6 KHz (-3dB) resistive load (100 Ohm)
- Meters and Interface
- Voltmeters & Ampere Meters ± 25000 counts 20% overload allowed
- Temperature Meter - 200 + 500 C° with PT1000 probes
- 0.1C° resolution 0.2C° accuracy
- Sampling Rate 100 readout / sec (included data transmission)
- Digital Interface USB and RS 232 with full instrument control
- Power Supply and Size
- Voltage Mains 115 / 230 V ranges (± 10%)
- Power Consumption 400 VA max
- Size & Weight 420 x 440 x 250 mm (L x W x H) Kg 25
- (rackmount brackets excluded)
7061 Slave Unit
- Polarisation Capabilities
- Voltage (compliance) ± 30 V or ± 15 V
- Voltage (controlled range) ± 10 V
- Current ± 10 A continuous (± 12 A peak) or + 25 A
- Slave Connectable Units Up to 3 for 30 V version
- 1 for 15 V version
- Max System Performance 30 V - 48 A or 15 V - 50 A
Customer reviews
No reviews were found for Model 7060 - Potentiostat/Galvanostat. Be the first to review!