Hamech - Model AZZP – 50 - Burner
AZZP 50 type burner is used to burn fuel: wood waste in form of wood chips, pellet, sawdust with moisture of 40% and granulation of 30 mm and turf with moisture of 40%. It can cooperate with open heating system boilers. Fuel from the tank is fed into the burner with ceramic lining by means of a driven worm conveyor. Fuel gasification takes place in the burner located in the boiler's combustion chamber. Their burning goes on in there as well. Then the gases flow from the combustion chamber to exchanger.
-
Most popular related searches
Product Details
Process of combustion in the burner should be preceded by ca. an hour long heating up of the chamber. This is possible owing to heating elements installed in the burner's chamber ceramic lining. Once the first fuel portion is fed to the furnace, an air fan is turned on at low power, and the lighter located in the body lights up the fuel with air. As desired glow temperature is reached, the device enters continuous combustion process. The lighter is turned off, the burner feeds the required fuel portion, fans blow the air for optimal combustion.
Once combustion phase is over, the device damps the flame. The burner stops feeding the fuel, and the fans damp the flame, while the furnace is cleaned from ash remains on the grate motion.
The device has a photocell installed so that the entire combustion process can be supervised.
Customer reviews
No reviews were found for Hamech - Model AZZP – 50 - Burner. Be the first to review!