Model BIO-KILN - Charcoal Kiln
From Auxiliary Equipment
BIO-KILN is an environmentally friendly charcoal-burning continuous furnace for the production of charcoal with a high content of non-volatile carbon, with the possibility of constant generation of thermal energy.
-
Most popular related searches
Advantages
stable quality and quantity of charcoal, which does not depend on the Staff.
Raw materials: seeds, shells and bones of fruit trees, chips, bamboo, bushes and other raw materials of plant origin with a fraction of 10-50 mm and humidity less than 15%.
Products: charcoal from pits of fruit or nutshell as raw material for the production of: briquettes for BBQ and hookah coal (shisha, hookah charcoal), activated carbon; ready BIO-Char from waste of plant origin, for use in the agricultural industry.
Advantages of the Kiln
- Environmental safety
- High efficiency and compact size
- High productivity (25-50 tons per month, depending on the raw material)
- Continuous 24/7 production
- Autonomous process (does not require manual operation)
- Generation of thermal energy
- Low power consumption
- Possibility of controlling the equipment remotely
- Possibility of making the process fully automated
- Content of fixed carbon in charcoal - 65-94%
Main Elements of the Continuous Charcoal Kiln
1. Loading hopper
Raw materials for pyrolysis is loaded into the hopper.
2. Charcoal kiln
Core processes take place inside the kiln: drying/pyrolysis/calcination. As the raw material moves down, it turns into charcoal. Raw material moves down the channels of raw materials.
3. Slide dampers for the charcoal unloading
Used for the charcoal unloading into the hopper for the charcoal stabilization.
4. Stabilization hopper
Developed for the charcoal stabilization before its unloading.
5. Trolley
The charcoal is unloaded into the trolleys for the further air degassing and cooling.
6. Afterburner
Pyrolysis products are burnt in the afterburner in order to provide the environmental friendlyness of the process.
7. Chimney, 8 rm
It is installed on the afterburner in order to provide the kiln operation without additional fan and smoke exhauster.
8. Dais
Designed for the convenience of loading of the raw materials into the hopper.
9. Auxiliary equipment. Additionally, the kiln can be equipped with:
- Storage hopper for raw materials
- Conveyor or noriya for loading of raw materials in the bunker of the kiln
- Closed and open augers for cooling and stabilizing charcoal
- The sensor of the level of raw materials in the kiln hopper
- Actuating mechanisms for opening dampers for coal unloading
- Automated control system, provide full automation of the process of obtaining a wood ghoul.
- Heat exchanger: gas - water, for producing hot water or other heat transfer fluid; gas - air, for getting hot air.
Kiln Description
Crushed (10-40 mm) and pre-dried raw material (with the moisture level of <15%) is loaded into the sluice feeder. Afterwards it enters the loading hopper that is located in the upper part of the kiln. The active area of the kiln consists of vertical downhole shafts-channels that end with dampers for unloading the finished product. Raw material descends the channels during the processes of preheating, pyrolysis, calcination and stabilization of charcoal. Gases released from the kiln enter the channel for flue gases and then move on to the afterburner, where they are combusted. The afterburner design provides full combustion, ensuring the environmental safety of the installation and preventing the release of harmful emissions into the atmosphere. Charcoal unloading is conducted with the help of the dampers located at the bottom of the kiln – in the stabilization zone. Each channel has several dampers that ensure the portioned unloading of the produced charcoal. Charcoal is unloaded into a special cart with wheels. After the cart is filled, it is replaced with an empty one. The unloaded charcoal is air-stabilized in the trolley, after that it is packed in containers according to the requirements of the Customers.
Customer reviews
No reviews were found for Model BIO-KILN - Charcoal Kiln. Be the first to review!