Model Biodiesel-Mini 3 - Biodiesel Semi-Automatic Module
From Biodiesel-MINI
Biodiesel-MINI3 is the automated version of Biodiesel-MINI2+. Initial products feeding, dosing, mixing, processing and filling of the separation tank with the processed mixture is done in automatic mode. Thus “the human factor” is excluded and therefore the improvement of accuracy and stability of initial products dosing as well as the increase of the total capacity in comparison with the previous models are achieved.
-
Most popular related searches
Configuration
- Cavitation reactor PULSAR-CT 805.
- Transfer pump on special base plate.
Automatic dosing system:
- Electronic weighing scales; heavy-duty polypropylene mixing tank, 80 liters; stainless steel enclosure; piping.
- Regulating valves panel.
- Electronic weighing processor with LCD indicator.
- Electric cabinet with weight controller inside and control panel.
- Group of solenoid valves for initial products feeding.
- Group of feed pumps on frame: oil pump; alcohol pump; catalyst pump.
- Separation tank (not included into basic configuration). Material – polypropylene, 95 liters.
Operation Procedure
The operator presses START button on the control panel (6).
Dosing, mixing and processing of the tree initial components are carried out automatically.
When processing is finished and the processed mixture is pumped to the separation tank, the controller turns off the system. The processing cycle is finished.
To start a new processing cycle the operator should press the START button again. Depending on properties of source oil it takes 30-60 minutes to settle (separate) the mixture to biodiesel and glycerol. After the separation of biodiesel and glycerol is completed, both products are discharged to the storage tanks and the separation tank is ready to receive the next charge of processed mixture.
To manufacture bigger amount of biodiesel the operator can use one separation tank, the volume of which is rated for some consecutive cycles of filling. Thus, the time for processed mixture separation is saved and accordingly the total capacity of the plant increases. Using Biodiesel-MINI3 in this mode one can produce up to 700 liters of biodiesel per shift (8 hours). To fill the large receiving tanks with the processed mixture Biodiesel-MINI3 can operate in continuous mode: after the first cycle of processing is completed the system starts automatically the next one and so on, until the last preset cycle is finished. After that, the module stops automatically.
Technical Parameters
- Capacity (average), liters per hour: 80-100
- Rated power, kW: 6.5
- Weight, kg: 240
- Overall dimensions (L x W x H), mm: 1850×1650×1700
- Operating conditions: twenty-four seven
- Processing efficiency, kW hour/liter (max): 0.03
- Flow rate adjustment: yes
Specifications
Customer reviews
No reviews were found for Model Biodiesel-Mini 3 - Biodiesel Semi-Automatic Module. Be the first to review!