Model DSE7450 - DC/Hybrid Generator Control Module
From Manual & Auto Start Control Modules
The DSE 7450 is a control module designed to control DC/Hybrid generators in supplying both a load and/or the charging of batteries.
-
Most popular related searches
Products Details
OVERALL SIZE
- 240 mm x 172 mm x 57 mm (9.4” x 6.8” x 2.2”)
PANEL CUTOUT SIZE
- 220 mm x 160 mm (8.7' x 6.3')
MAXIMUM PANEL THICKNESS
- 8.0 mm (0.3”)
WEIGHT
- 0.92kg
PRODUCT VARIANTS
- 7450-01 - 7450 DC Generator Control Module
Key Features
- Automatic/manual start with configurable start/stop timers.
- Configurable inputs/outputs (10/8).
- Mains (Utility) failure detection.
- AC/DC voltage measurement.
- Battery temperature monitor/charge remaining display/depth of discharge display.
- Backed-up real time clock.
- Configurable event log (250).
- Battery condition automatic start/stop.
- USB, RS232, RS485, Ethernet and Modbus RTU/TCP communications.
Benefits
- Offers flexibility to control the module manually, remotely or on pre-set timers and start/stop according to battery condition.
- Provides multiple installation options.
- Gives full mains (utility) back up.
- Provides flexibility for use on AC or DC systems.
- Provides information on battery temperature, charge remaining and depth of discharge.
- Ensures data is not lost when module is disconnected from its power source.
- Provides access to historical alarms and operational status.
- Avoids the battery draining completely by starting the generator when the battery needs charging.
- Provides secure and simple off site monitoring. All ports are continuously active.
Specification
DC SUPPLY
CONTINUOUS VOLTAGE RATING
- 8 V to 35 V Continuous
CRANKING DROPOUTS
- Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries
MAXIMUM OPERATING CURRENT
- 260 mA at 12 V, 130 mA at 24 V
MAXIMUM STANDBY CURRENT
- 120 mA at 12 V, 65 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
- 0 V to 35 V
OUTPUTS
OUTPUT A (FUEL)
- 15 A DC at supply voltage
OUTPUT B (START)
- 15 A DC at supply voltage
OUTPUTS C & D
- 8 A AC at 250 V AC (Volt free)
AUXILIARY OUTPUTS E,F,G,H,I & J
- 2 A DC at supply voltage
GENERATOR
VOLTAGE RANGE
- 15 V to 150 V AC (L-N)
FREQUENCY RANGE
- 3.5 Hz to 75 Hz
- MAINS (UTILITY)
VOLTAGE RANGE
- 15 V to 333 V AC (L-N)
FREQUENCY RANGE
- 3.5 Hz to 75 HzMAGNETIC PICK UP
VOLTAGE RANGE
- +/- 0.5 V to 70 V
FREQUENCY RANGE
- 10,000 Hz (max)
Environmental Testing Standards
ELECTRO-MAGNETIC COMPATIBILITY
- BS EN 61000-6-2
- EMC Generic Immunity Standard for the Industrial Environment.
- BS EN 61000-6-4
- EMC Generic Emission Standard for the Industrial Environment.
ELECTRICAL SAFETY
- BS EN 60950
- Safety of Information Technology Equipment, including Electrical Business Equipment.
TEMPERATURE
- BS EN 60068-2-1
- Ab/Ae Cold Test -30°C.
- BS EN 60068-2-2
- Bb/Be Dry Heat +70°C.
VIBRATION
- BS EN 60068-2-6
- Ten sweeps in each of three major axes.
- 5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
HUMIDITY
- BS EN 60068-2-30
- Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
- BS EN 60068-2-78
- Cab Damp Heat Static 40° C @ 93% RH 48 Hours.
SHOCK
- BS EN 60068-2-27
- Three shocks in each of three major axes 15 gn in 11 ms.
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
- BS EN 60529
- IP65 - Front of module when installed into the control panel with the optional sealing gasket.
Customer reviews
No reviews were found for Model DSE7450 - DC/Hybrid Generator Control Module. Be the first to review!