Model HS - Logger District Heating Network Monitoring
From Water Leakage - Smart Solutions
Electrical resistance data logger for brandes. District heating pipelines or similar systems. Battery operated, lasts for up to 5 years. Software hs log free and easy to use. Ip66 housing with grommet for the wires. Connecting to brandes system pipeline.
Applications
- Resistance measurement (Ohm) in district heating pipelines (BRANDES-System, etc.)
- Algorithm determines leak status based on 3 resistance values
- Data transmission via radio (433 MHz) to the tablet and / or remote transmission via LoRa WAN
Product Details
The HS Logger is the automatic leakage monitoring system for district heating or cooling networks, which thanks to LoRaWAN or Data transmission via radio (433MHz) provides reliable measurement data quickly and easily. Integration into existing LoRaWAN networks is possible without any problems.
The resistance measurement (Ohm) via HS Logger takes place daily, by measuring the contact, insulation and loop resistance of the wire pairs in the insulation layer of longdistance lines on BRANDES systems or comparable methods.
The HS Logger makes use of three resistance values for an accurate assessment of the leakage status. The HS Logger can be directly connected to the BRANDES system. Through the IP66/67 housing the HS Looger is flood proof and suitable to be used in all kind of surroundings.
The battery-operated HS Logger is independent of the power supply and can be operated autonomously for up to 5 years. It transmits the measured values and information on the device status via Bluetooth to the HS Log software using the ServiceMaster or directly to the CloudServer using LoRaWan. The easy-to-use HS-Log software (available in the Google Playstore) is available free of charge and enables a meaningful assessment of the path status as well as the visualization of the measured values.
The range of data transmission in the LoRaWan is, depending on the structural conditions in urban areas up to 2 km, in more rural areas with less buildings even up to 15 km. Data can even be transmitted through manhole covers, walls or from basements.
Due to this time-saving measuring method - because the time-consuming coordination of appointments with operators, residents and time-consuming manhole entries are no longer necessary - the HS Logger can also be used as a substitute for manual monitoring of measuring points. The fast detection of damage enables immediate reaction and thus prevents greater damage and costs.
Customer reviews
No reviews were found for Model HS - Logger District Heating Network Monitoring. Be the first to review!