Model HT - High Temperature Gas Flare
From Biogas Flares
The HT series flares are designed to offer a combustion temperature above 1000 °C and residency time longer than 0,3 s. This is to comply with the widely-applied German norm TA-Luft, in those case in which the flare is not just an emergency element, as well as in case of landfills and other complex and special gases.
The HT features heat-resistant ceramic insulation, automatic air intake regulation and temperature control, as well as automatic ignition and operation, using a pilot burner usable with biogas or an extra source of gas (i.e. LPG)
-
Most popular related searches
Area of deployments:
Area of deployments:
Thermal disposal of combustible surplus gases (landfill gas plants) or special gases.
HT flares are supplied with heat-resistant ceramic lagging (up to 1220 °C) and automatically controlled air flap. The flare burner starts when the start signal and the gas pressure due for flare. Automatic ignition and control during operation. All control functions in weatherproof control cabinet.
Ignition system: Pilot burner for propane, natural gas and special gases.
All wetted components are welded of V4A steel, rayed and passivated.
Type Specification
- Volume flow: 50 -1500 Nm3/h
- Medium: landfill & special gases
- Heat value: 35-95%CH4
- Gas pressure: min. 20 mbar
- Connection: DN50-DN200
- Ignition: high voltage 10 kW
- Flame control: UV-cell
Main Features
- Concealed burning > 1000 °C
- Dwell of 0,3 sec (TA air)
- Insulated burning chamber
- Standardized to EN746
Main Features
- Two-step main gas valve
- Stainless steel switch board
- Continuous power regulation
- Flare-length according to customers wish
Customer reviews
No reviews were found for Model HT - High Temperature Gas Flare. Be the first to review!