Energy Equipment & Supplies Near Netherlands Antilles
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The HPG range of pipeline actuators are designed to use pipeline gas as the motive power source. They utilise our robust scotch yoke mechanism field proven the world over in all types of fluid power applications. Manual override is a standard feature of the range. Our design incorporates a separate cylinder for hydraulic override to ensure complete separation of high-pressure pipeline gas from ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Replacement handwheels can be ordered blank or custom fitted. If fitted, dimensional information is ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Especially harsh operating environments sometimes necessitate an extra level of protection for chainwheels. Many chainwheels are used in the petrochemical industry, where they are exposed to chemicals, extreme temperature or humidity. In such cases, we offer galvanized chainwheels to extend the life of the product in corrosive ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Especially harsh operating environments sometimes necessitate an extra level of protection for chainwheels. Many chain wheels are used in the petrochemical industry, where they are exposed to chemicals, extreme temperature or humidity. In such cases, we offer stainless steel chainwheels to extend the life of the product in corrosive ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Hydraulic power units (HPU) complement our extensive offering of rotary and linear actuators. We have over three decades of experience in their manufacture with units in service in a variety of plants and pipelines in locations spanning the ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The gas-over-oil range of pipeline actuators are designed to use pipeline gas as the motive power source. They utilise our robust GH and RH quarter-turn prime movers and are field proven in installations around the world. Control configurations are available to meet virtually any operational ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The Rotork Master Station provides the high integrity link from the Distributed Control System (DCS) to the devices in the field. It comes complete with a large touch screen interface to allow operators and engineers to see exactly what is happening to the system and the field devices at any time. A hot standby Rotork Master Station allows for continued availability of the system in the event of ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The IQT Battery Backup actuator provides valve fail-safe operation by utilising power from a battery source during AC supply mains failure. Under normal supply conditions the actuator operates from the site AC electrical supply. On loss of this supply the actuator automatically switches over to receive power from a 24 VDC supply allowing control of the valve to the pre-configured ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Can be powered by 1-phase or direct current supplies. Part-turn drive action. Optional Local Controls with LCD Display (linear, part-turn, multi-turn) as well as Local Controls with LCD Display Plus Supercapacitor Reserve Power Pack (RPP) (linear and part-turn only) units ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Can be powered by 1-phase or direct current supplies. Linear drive action. Optional Local Controls with LCD Display (linear, part-turn, multi-turn) as well as Local Controls with LCD Display Plus Supercapacitor Reserve Power Pack (RPP) (linear and part-turn only) units ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
One or two-channel barrier for the safe separation of 4...20 mA standard signal circuits. The RB223 passive barrier can be used to galvanically isolate active signal circuits (0 to 20 mA) in three applications: Transmission from non-Ex to Ex areas e.g for active adjusters, controllers or indicators, Transmission from Ex to non-Ex areas for connection of active, intrinsically safe circuits to the ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
The BTU meter RH33 is used in applications with liquid energy carriers. It calculates the thermal energy of water acc. to EN1434, glycol/water mixtures or other fluids such as thermal oils. Temperature sensor matching using calibrated temperature sensors is done in the device. Potential for cost savings can be shown by using the software available as an accessory. The device has a custody ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Power supply for two 2 wire sensors or transmitters. The power supply has two galvanically isolated outputs for supplying voltage to sensors and transmitters. A built-in communication resistance enables bidirectional HART® communication with SMART sensors and ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Power supply for one 4 wire sensor or transmitter. The power supply has one output for supplying voltage to 4 wire sensors and transmitters. Connection to mono-phased a.c. networks or to two phase conductors of three-phase supply networks (TN-, TT- or IT-networks as per VDE 0100 T 300/IEC 364-3) with 100-240 V AC nominal voltage ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Universal flow and energy computer for gases, liquids and steam. The flow and energy manager RMC621 calculates standard volume as well as mass and energy flows of natural and technical gases, fluids and steam from flow, pressure, temperature and density. Depending on the medium calculation of the energy values occurs according to international standards (IAPWSIF97, SGERG88), real gas equations ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Paperless recording, visualization and monitoring of the process values at the same time. Safe and complete recording and visualization of all process sequences. The Memograph M RSG40 has a wide range of functionality, modular construction and a intuitive operator concept. With its brilliant 7” TFT display it is possible to display process values e.g. as curves, as a circular chart display ...
-
Manufactured by Shimadzu Scientific Instruments Incbased in USA
The iMLayer matrix vapor deposition system is sample pretreatment (application of matrix) in order to perform MALDI-MS imaging using an analysis system such as the iMScope imaging mass microscope or the MALDI-7090. With the iMLayer, the deposition method has been adopted as a pretreatment method to achieve high spatial resolution. By using this method, fine matrix crystal can be produced. Also, ...
-
Manufactured by Yamato Scientific America Inc.based in USA
Standard barrel type low temperature ashing devices suitable for a wide range of application such as ashing , etching and dry ...
-
Manufactured by Yamato Scientific America Inc.based in USA
Compact, barrel type low temperature ashing device designed with a large chamber made of quartz considered almost completely resistant against most plasma ...
-
Manufactured by Elecnorbased in SPAIN
Elecnor is a leader, both domestically and abroad, in the distribution network, power transport line and transformation substation industry. As a benchmark company for the leading domestic electricity operators, it has managed to steadily and progressively increase its market share. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you