NST - Model BH-30-063 - Large Volume Horizontal Bare Water Storage Tanks
From Water Storage Tanks - Horizontal
Designed for storage of potable water up to 180 degrees F (82 degrees C). All tanks are constructed and certified – in accordance with ASME IV, Part HLW for 125 PSI (862 kPa). Niles Steel Tank’s Ultonium™ lining is applied to the interior surface of the steel providing a tough wear resistant lining which minimizes the effects of high temperature hot water. Magnesium anode rods – for protection and longer service life. One 3/4″ Aquastat NPT fittings.
-
Most popular related searches
Products Details
Bare horizontal tanks can also be insulated with our topcoat R-16 spray-on insulation which make the tank suitable for outdoor usage.
As per ASME regulations, all HLW hot water storage tanks over 36″ diameter are required to have a manway. 36″ diameter and below, manways are optional.
Protect your investment further by installing our Power Anode system.
- Designed for storage of potable water up to 180° F (82° C).– All tanks are constructed and certified – in accordance with ASME IV, Part HLW for 125 PSI (862 kPa).
- Niles Steel Tank’s Ultonium™ lining– Applied to the interior surface of the steel providing a tough wear resistant lining which minimizes the effects of high temperature hot water.
- Magnesium anode rods– For protection and longer service life. (optional power anodes available on select sizes)
- One 3/4″ Aquastat NPT fittings– Located for optimal temperature reading.
- 9″ Saddle Height– Standard on all horizontal tanks. Taller saddles are available and allows for easier access to areas under the tank.
- Lifting Lugs– Standard.
- Red Oxide Primer– Shop primer is standard on all tanks. Top coat insulation and finish coats are also available.
- Five year limited warranty on steel tank– Provides warranty protection against tank failure resulting from defects in materials and workmanship.
- Ten year limited warranty on steel tank (with double glass lining)– provide superior warranty protection against tank failure. Double glass lining is not an inventory item, built upon request.
Design Notes
- Code………………………. ASME Sec IV HLW
- Design Pressure………… 125 psi
- Test Pressure……………. 125 psi
- Interior…………………….. Ultonium Glass Lining
- Exterior……………………. Primed Painted
- Supports………………….. Saddles
- Capacity………………….. 175 Gal./ 193 nominal
- Weight……………………. 365 Lbs.
Material Specifications
- Heads…………………… Carbon Steel
- Shell…………………….. Carbon Steel
- Couplings………………. Carbon Steel
- Flanges…………………. N/A
- Pipe……………………… N/A
- Manway…………………. N/A
Customer reviews
No reviews were found for NST - Model BH-30-063 - Large Volume Horizontal Bare Water Storage Tanks. Be the first to review!