Polarchem - Online Cleaning Gas-Fired Boilers and Furnaces
-
Most popular related searches
The Polarchem products react with the residue from...
The Polarchem products react with the residue from combustion by oxidization and neutralization with the result that any fouling is reduced in quantity and made dry and friable.
The fouling is formed in the path of the flue gas and therefore the product is injected in such away that it will mix with the flue gas to reach the fouling.
Sometimes the fouling is hard or humid and will not be completely removed by the force of the flue gas or by the soot-blowers. Polarchem softens and dries the deposits, which then become easier to remove.
The Polarchem products are injected into the periphery of the flames without interfering with the combustion and there are no damaging direct hits on burners, tubes, refractory and thermo-couples.
This procedure has made the Polarchem method known as ‘soft' on-line cleaning.
Please visit www.jayneproducts.com or call +1-310-715-3070 for more information.
When Should Polarchem be Used?
- It can be used as cure or prevention whenever the bridge-wall temperature increases or the pressure drop across the convection indicates that there is a fouling problem.
- Polarchem can be injected manually through existing inspection doors or openings in the radiation section of the furnace.
- The injections can start at any time and there is no need to reduce the load during the intervention.
- Semi-automatic or fully automatic injection systems are easy to install.
Some Good Reasons for Using Polarchem
- Improve the efficiency of the furnace
- Reduce fuel consumption
- Increase intervals between shut-downs
- Avoid un-programmed shut-downs
- Reduce soot-blowing
- Reduce air pollution
- Reduce corrosion from Sulphur and Vanadium
- Simplify the cleaning during shut-down
- Mostly dry-cleaning becomes possible during shut-down
- Improve security of operation by maintaining temperatures and pressures within given limits
Cleaning Gas-Fired Boilers and Furnaces
POLARCHEM introduces a new flexible operational aid for on-line cleaning of Boilers, Furnaces and Incinerators firing gas only or in combination with other fuels.
- Stage 1 : accelerated oxidization, which can be used on its own in the absence of Sulphur, Chlorine or Vanadium to remove unburnt Carbon.
- Stage 2 : controlled oxidization to remove unburnt Carbon together with
- Stage 3 : neutralization of Sulphur, Chlorine and Vanadium compound
Customer reviews
No reviews were found for Polarchem - Online Cleaning Gas-Fired Boilers and Furnaces. Be the first to review!