Salamandra Safety - Model AGS-6 - Aerosol Fire Extinguisher AGS-6
AGS-6 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.
Generator is made in a shape of cylinder with metal body which has outlets on the whole lateral surface. It has a low temperature of the outgoing aerosol stream due to the cooling unit which is located inside.
The electrical impulse which comes to the starter * which is installed inside generator, ignites the aerosol forming cartridge. During the burning of it the fire extinguishing aerosol is produced. The aerosol flow penetrates the cooling layer and comes out of generator through the nozzle.
This generator is recommended for use as part of fire extinguishing systems in the premises of medium volume.
-
Most popular related searches
Technical characteristics
Technical characteristics
Fire classes |
||
Aerosol generating cartridge weight |
3.5 kg |
|
Protected volume |
52 m3 |
|
Net weight |
12.5 kg |
|
Diameter - Height |
167 mm x 420 mm |
|
Time of operating |
37 sec |
|
Starter |
VR-7.5, VRTH |
VEL, VELTH |
Starter impedance |
7.5 Ohm |
2.5-4 Ohm |
Starter minimum current |
1? |
0,4 ? |
Starting voltage |
8 – 30 V |
1,5 – 24 V |
Duration of the starting impulse |
Not less than 1.5 sec |
Not less than 0.1 sec |
Delay of generator start up |
< 2,0 sec |
|
Operating conditions |
-50° C / + 50° C, humidity up to 98%, mechanical influence at frequency range up to 100 Hz – 1 g. |
* The starter type is chosen by the Buyer
Customer reviews
No reviews were found for Salamandra Safety - Model AGS-6 - Aerosol Fire Extinguisher AGS-6. Be the first to review!