SSET - Three Phase Power Transducer
From Power
This device is an electrical isolation transducer of 3-phase active, reactive power, power factor, and true RMS measurement. Its input is isolated from output signal, and output linear standard analog signal. Through the internal switch, can switch to active, reactive power and power factor measurement of 3-phase 3-wire and 3-phase 4-wire. The product can be widely used in electric power, communications, railway, industrial control and other fields.
-
Most popular related searches
Details:
- Power supply: DC +11V~+28V (power consumption<60mA),
- AC/DC 85V-265V;
- Input range: voltage AC: 0~500V; current AC: 0~200A;
- Power factor transmitter need to subjoin:
- Power factor 0~1(unipolarity), 0.01L~1~0.01C (bipolarity);
- Output: output a one-way voltage and current at the mean time, eight kinds of output of 0-5V/0-20mA or 1-5V /4-20mA or 2.5±2.5V/10±10mA or 3±2V /12±8mA can be set freely;
- Output ripple: <10mV;
- Accuracy class: 0.5 (with reference error);
- Temperature drift: <300ppm/℃
- Isolation voltage: DC 2500V;
- Load capacity: voltage output≥500Ω, current output≤300Ω,(24V DC power supply can be up to 800Ω);
- Response time: ≤300 mS;
- Isolation voltage: DC 2500V;
- Rated power consumption: <1.5W;
- Frequency range: 40Hz~75Hz
- Surge immunity:
- Power port four 4KV (L-N / 2Ω / integrated wave),
- Output port two 2KV (L-N / 40Ω / integrated wave);
- Impulse immunity:
- input/power port ± 2KV, analog I/O port ± 1KV;
- Input overload capacity:
- Continuous overload: 120%; short-term overload:
- 2 times the rated voltage input value, the application of 1 second, 20 times the rated current input, the application of 1S;
- Storage conditions: -40 ~ +70 ℃.
Customer reviews
No reviews were found for SSET - Three Phase Power Transducer. Be the first to review!