ThermConcept - Model KM 110/13-KM 1600/13 - Chamber Furnaces
From Heat Treatment Metals - Annealing and Hardening - Chamber Furnaces
Charging plates and grates as additional protection for the furnace bottom. Lateral protective cover of the heating elements through silicon carbide boards. Lift door with hydraulic drive, operable via foot pedal or 2-hand operation (standard from KM 780/13). Automatic fresh air and exhaust air flaps, controlled via the program controller. Fresh air fan for forced cooling of the batch or exhaust gas discharge. Semi-gas-tight design with special sealing and gas connection for non-flammable protective gases. Gassing and hardening boxes and suitable charging aids.
-
Most popular related searches
Product Details
- Very robust chamber furnaces e.g. for annealing, hardening, powder carburizing and powder nitriding, preheating, forging etc.
- Double-walled housing with rear ventilation for low outside shell temperature
- Parallel guided swing door opening downwards (KM 10/13 – KM 70/13), with steel tray on the door as charging aid as well as door lintel, both made of stainless steel, loading height approx. 900 mm
- From KM 110/13 manual parallel guided door up-wards opening, with counterweight, easy to open, from KM 780/13 with hydraulic lift door
- Base frame already included in the standard scope of delivery (from KM 50/13)
- Multi-layer insulation (lightweight refractory bricks and insulation) for low heat loss, low energy con-sumption, low electricity costs
- 3-sided heating (from both sides and bottom) with heating wire for a uniform temperature distribution in the furnace chamber
- Heating elements mounted on ceramic support tubes, free heat radiation into the furnace chamber, thereby energy saving and long service life of the heating elements
- Covering of the floor heating elements by heat permeable silicon carbide plates with high mechanical strength, to protect the bottom heating
- Sufficiently dimensioned power guarantee short heating times
Technical Specification
- Model: KM 110/13
- Max. temperature: Max. temperature | C°: 1280°C
- Inside dimensions: Inside dimensions | mm: W 500 x D 650 x H 350
- Outside dimensions: Outside dimensions | mm: W 1350 x D 1750 x H 1950
- Weight: Weight | kg: 670 kg
- Volume: Volume | l: 110 l
- Power: Power | kW: 22 kW
- Voltage: Voltage | V: 400 3/N V
Customer reviews
No reviews were found for ThermConcept - Model KM 110/13-KM 1600/13 - Chamber Furnaces. Be the first to review!