Renewable Energy Equipment & Supplies In Ohio

Fluorotherm™ shell and tube heat exchangers are used for in-line heating and cooling applications for corrosive and ultrapure fluids. These units have been designed with efficient heat transfer as the primary purpose, offering a baffled cross flow heat exchanger. Our shell and tube heat exchangers are commonly used for oil refinery and chemical processes applications, and while they're ...

The AGV10 is a compact and efficient air-fuel ratio controller for industrial gas engines. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV10 is easy to install and compatible with a variety of carburetors and mixers. It can be used with alternative fuels ...

Ultra-compact steam boiler producing up to 5,200 kg/h of steam, built to EN 12953 standard. The CSB excels with its high efficiency rating of up to 95.3% and its low emissions already comply with future requirements of the MCP Directive (EU) ...

RYDLYME Biodegradable Descaler is used to safely and efficiently dissolve tough mineral deposits such as water scale, limescale, calcium, and rust from the water side of industrial equipment! Recommended by the U.S. Navy and countless OEMs, RYDLYME descaling chemical is NSF-registered for use in various industries and applications including beverage, pharmaceutical, bottling, and food processing ...

The AGV50 is a compact and efficient air-fuel ratio controller for industrial gas engines from 5,000 bhp to 38,750 bhp. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV50 is easy to install and compatible with a variety of carburetors and mixers. It can be ...

SpiraBar enables thermal performance equal to, or better than, any splash bar on the market by providing the most uniform droplet distribution of any splash bar design. More uniform distribution of water and air allows the bars to be installed without a staggered configuration, which older bars required due to water shedding. When paired with Brentwood's SpeedGrid system, SpiraBar installs 50% ...

The Continental Controls Corporation AGV pilot valve is a critical component of gas turbine engine control systems. It is a compact, lightweight, and easy-to-install device that helps to improve engine performance and reliability. The AGV pilot valve is responsible for controlling the flow of fuel and air in the engine, ensuring that the engine operates at optimal levels of efficiency and safety. ...

Deep Cycle Battery, 24 Volt, 1200 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...

AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...

Applications: To transfer fluids at flow rates between 10 and 175 GPM up to 150 psi in applications such as fleet, aviation, marina, construction, and agriculture refueling as a well as bulk loading/unloading for rail, truck, and marine vessels. Typical fluids include Fuels, Oils, Lubes, Anti-freeze, Petroleum Contact Water (PCW), Transmission Fluid, and some petrochemicals. The Tri-Lobe pump ...

Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to produce energy from burning waste. This renewable energy solution is extremely popular and is constantly being enhanced. It can reduce the volume of waste to just 10% in bottom ash for most ...

TRILITE® UPRM400U is an ion exchange resin for high-purity ultrapure water, which is produced by mixing regenerated uniform cation and anion exchange resins in equal quantities. It is possible to manage not only the purity of the produced water but also the Total Organic Carbon (TOC) and Ion leakage. ...

Dry desulfurization is to utilize the reducibility and flammability of SO2, using solid oxidant or adsorbent to desulfurize, or directly make it burn. Dry desulfurization is a method to produce Na2SO4 by the reaction of NaHCO3 and SO2, which is called dry ...

The company's self-developed low-temperature denitration catalyst adopts advanced production technology. The catalyst has very good denitration performance in the low temperature section (180-280 °C), it can process high concentration of nitrogen oxides, and the denitration efficiency is over 95%. Low-temperature denitration catalysts are widely used in coking plants, sintering machines, ...

The GV2 by Continental Controls Corporation is an electronic fuel control valve designed specifically for small to midsized gas engines. It offers advanced electronic fuel control to allow fuel flow ranges that include LHV/Low BTU flare gas, biogas, and landfill gas. The GV2 features a servo-coil actuator, making it fast and smooth acting with low maintenance and high MTBF. It also offers ...

UIG’s EVERSTORE glass-fused-to-steel tanks are the optimal solution for anaerobic digester applications. Whether mesophilic, thermophilic, pasteurizing or enzymic hydrolysis processes, EVERSTORE and EVERSTORE Hybrid tanks are the industry leader in anaerobic digestion and biogas production for renewable energy ...

Deep Cycle Lead Acid Battery with Removable Cover, 24 Volt, 960 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...

Deep Cycle Battery, 24 Volt, 1200 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes only. ...

This type adopts international advanced technology and high-quality cordierite catalyst carrier. Coating composite molecular sieve catalyst, to improve the activity and stability of the catalyst at high temperature. It can be widely used in 300-550°C working conditions, and can be customized according to different industry conditions. It is commonly used in various high-temperature flue gas ...

Low nitrogen oxide combustion technology is to improve the combustion equipment or control the combustion conditions, using a variety of combustion means in the furnace to control the production of NOx in the combustion process, in order to reduce the NOx in the tail gas of the combustion ...