Renewable Energy Equipment Supplied In Asia & Middle East

Dry desulfurization is to utilize the reducibility and flammability of SO2, using solid oxidant or adsorbent to desulfurize, or directly make it burn. Dry desulfurization is a method to produce Na2SO4 by the reaction of NaHCO3 and SO2, which is called dry ...

Inciner8 have developed a new Waste to Energy solution that utilises moving grate technology to provide a more consistent stream of waste fuel to power electricl generation 24/7. The i8-E35 has been designed from the ground up specifically for the waste to energy sector. It has been tested rigourously with a variety of RDF waste types to ensure optimum performance with a wide range of feedstocks ...

The company's self-developed low-temperature denitration catalyst adopts advanced production technology. The catalyst has very good denitration performance in the low temperature section (180-280 °C), it can process high concentration of nitrogen oxides, and the denitration efficiency is over 95%. Low-temperature denitration catalysts are widely used in coking plants, sintering machines, ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...

AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...

Low nitrogen oxide combustion technology is to improve the combustion equipment or control the combustion conditions, using a variety of combustion means in the furnace to control the production of NOx in the combustion process, in order to reduce the NOx in the tail gas of the combustion ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...

TRILITE® UPRM400U is an ion exchange resin for high-purity ultrapure water, which is produced by mixing regenerated uniform cation and anion exchange resins in equal quantities. It is possible to manage not only the purity of the produced water but also the Total Organic Carbon (TOC) and Ion leakage. ...

This type adopts international advanced technology and high-quality cordierite catalyst carrier. Coating composite molecular sieve catalyst, to improve the activity and stability of the catalyst at high temperature. It can be widely used in 300-550°C working conditions, and can be customized according to different industry conditions. It is commonly used in various high-temperature flue gas ...

This type adopts a front-end hardening process, increase the wear-resistant coating and maintain a long mechanical life. The raw material is made of high quality anatase titanium dioxide with large specific surface area. It is optimized for the flue gas environment of various industries and has strong anti-poisoning ability. The product design can be carried out for different flue gas conditions, ...

The i8-1000G has the highest capacity of our range of general waste incinerators with suitability for various waste streams such as solid waste, MSW, RDF, wood, paper, cardboard and plastics. The flagship model within our general lineup is the i8-1000G. It took over three years to develop and is are the forefront of combustion technology, offering impressive burn rates and large batch sizes while ...

Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to produce energy from burning waste. This renewable energy solution is extremely popular and is constantly being enhanced. It can reduce the volume of waste to just 10% in bottom ash for most ...

Packed Tower Gas Absorber: The Clean Air Group, LLC Packed Tower Gas Absorber utilizes a vertical counter-current design for highly efficient absorption of a variety of toxic gases. In addition to its extensive uses in air pollution control, the Packed Tower can serve as a gas/liquid contactor in a number of process applications. Efficiencies of 99.9% and greater are not unusual for many ...

The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...

The GMD series, made by AERZEN, is the universal gastight booster solution for the low pressure range. Equipped with a magnetic coupling, it ensures a maintenance-free sealing concept. Locking systems for sealing the drive shaft are completely eliminated and allow a low-maintenance machine concept. The separation between oil and process side is achieved by a special piston ring ...

SpiraBar enables thermal performance equal to, or better than, any splash bar on the market by providing the most uniform droplet distribution of any splash bar design. More uniform distribution of water and air allows the bars to be installed without a staggered configuration, which older bars required due to water shedding. When paired with Brentwood's SpeedGrid system, SpiraBar installs 50% ...

Inlet/outlet: 3/8", max. Temperature: 130?, max. Flow rate: 28.5L/min. Wetted parts all are combined with special material PTFE-TFM, excellent flexible and ...

A pre-engine/pre ignition device used to control the exhaust emissions through combustion kinetics change in all internal combustion engines using diesel, bio-diesel, leaded ,unleaded petrol, kerosene, gaseous fuels, including blended/emulsified fuels and also used in the gas turbines and all external combustion equipments-boilers, furnaces, room heaters ...

The Dual Fluidized Bed ( DFB ) Gasifier developed by Gussing Renewable GmbH (GRE) with the technology introduced by Vienna University of Technology, is considered as the most sophisticated process for the production of gas from renewable resources in the world and is state of the art. At the heart of the FICFB (Fast Internally Circulating Fluidized Bed) reactor are two interconnected fluidized ...

Expandable Can be paralleled up to 30MW of power. Your location could not be detected. Please allow www.capstoneturbine.com to detect your location to find the distributor that services your region. If you previously blocked CapstoneTurbine from knowing your location, click the location marker symbol in your address bar to fix ...