Refuse Derived Fuels (RDF) Equipment & Supplies In Ohio
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The AGV10 is a compact and efficient air-fuel ratio controller for industrial gas engines. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV10 is easy to install and compatible with a variety of carburetors and mixers. It can be used with alternative fuels ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The GV2 by Continental Controls Corporation is an electronic fuel control valve designed specifically for small to midsized gas engines. It offers advanced electronic fuel control to allow fuel flow ranges that include LHV/Low BTU flare gas, biogas, and landfill gas. The GV2 features a servo-coil actuator, making it fast and smooth acting with low maintenance and high MTBF. It also offers ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The i8-1000G has the highest capacity of our range of general waste incinerators with suitability for various waste streams such as solid waste, MSW, RDF, wood, paper, cardboard and plastics. The flagship model within our general lineup is the i8-1000G. It took over three years to develop and is are the forefront of combustion technology, offering impressive burn rates and large batch sizes while ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The AGV50 is a compact and efficient air-fuel ratio controller for industrial gas engines from 5,000 bhp to 38,750 bhp. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV50 is easy to install and compatible with a variety of carburetors and mixers. It can be ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 have developed a new Waste to Energy solution that utilises moving grate technology to provide a more consistent stream of waste fuel to power electricl generation 24/7. The i8-E35 has been designed from the ground up specifically for the waste to energy sector. It has been tested rigourously with a variety of RDF waste types to ensure optimum performance with a wide range of feedstocks ...
-
Manufactured by Pure Energy Centre (PEC)based in UNITED KINGDOM
The Pure Energy Centre is dedicated to pioneering the design and development of high-pressure hydrogen filling stations and dispensers, ranging from 350 to 700 bar for maximum safety. Our journey began in 2005 and has led us to establish a cutting-edge 700 bar 24/7 hydrogen dispensing facility today. With a proven track record, we have garnered expertise in every aspect of hydrogen alternative ...
-
Manufactured by Combustion Associates Inc. (CAI)based in USA
Spirit 1 MW power generation system is designed for maximum flexibility and the highest availability of both liquid and gaseous fuels with heat values as low as 450BTU/cu.ft. This compact, fully contained modular power generation solution offers maximum ease of integration with a wide range of alternative fuel applications. The system uses a proven aero-derivative gas turbine that gives over 40 ...
-
Manufactured by STELA Laxhuber GmbHbased in GERMANY
Hybrid heating systems combine two or more technologies to create an efficient, environmentally friendly and cost-effective heating solution. They typically consist of a combination of renewable energies and fossil fuels. The innovative stela hybrid heating system not only saves energy costs in heat generation, it also protects the environment. The flexibility in the choice of fuels, the low ...
-
Manufactured by Global Mainstream Dynamic Energy Technology Ltd (GMDE)based in CHINA
Top safety & reliability solutions: the system stores solar energy for later use at any time of the day or night. When the grid goes down, integrated backup power prevents the household from ...
-
Manufactured by John Zinkbased in USA
The ECOjet Edge Ultra-Low NOx Burner by John Zink is engineered to provide powerful combustion solutions while maintaining low NOx emissions for a variety of fuels including natural gas, propane, and various liquid fuels. This advanced combustion technology is suited for package, industrial, and utility boiler applications, delivering a precise fuel-air mixture with its innovative staged spuds ...
-
Manufactured by HF Motion Technology Co., Ltd.based in CHINA
The E-Hybrid Solar tech integrated motor controller brings a greener and more sustainable approach to rickshaw transportation. This innovative motor controller is engineered to enhance the performance and efficiency of solar-powered rickshaws, reducing their environmental impact and providing an eco-friendly alternative to traditional fossil fuel-driven ...
-
Manufactured by BioCNG, LLCbased in USA
Sour gas means any gas containing significant amounts of hydrogen sulfide (H2S). Natural gas is usually considered sour if there are more than 5.7 milligrams of H2S per cubic meter of natural gas, but this can vary by state. Sour gas is usually flared or vented, but if “sweetened” or conditioned, it could make an excellent source of biogas for use in a BioCNG alternative fuel ...
-
Manufactured by AGCO Powerbased in FINLAND
AGCO Power CORE is an exceptional diesel engine family with its excellent fuel economy, reliable low-speed concept and a streamlined design that enables higher quality with fewer parts. Rigorously tested and crafted, AGCO Power CORE family is a reliable source of low-emission power for all off-road applications in the 100–250 kW range. But it is also a flexible platform designed with ...
-
Manufactured by CARBOTECHNIK Energiesysteme GmbHbased in GERMANY
Our hot gas generators can be used for drying a broad range of products such as cement, limestone, animal feed, grass, etc. The burner is primarily designed for the combustion of pulverised materials, such as lignite, biomass, sludge, etc. But gaseous and liquid fuels can be used as well. Depending on the design, automatic switching between fuels is possible without modifications and the ...
-
Manufactured by Mimsan Energybased in TURKEY
New generation of circulating fluidized-bed technology is designed to provide full combustion by re-presenting unburned particles to the furnace. Therefore, it may be fired with high efficiency levels by both low calorie and high calorie lignite. By this technology, energy economy may be achieved in any period on the basis of periodic changes that take place on fuel alternatives. ...
-
Manufactured by Cratech, Inc.based in USA
This advanced Biomass Fueled Power Plant will convert organic waste to a syngas using a patented pressurized gasification system. The syngas is used to fuel a gas turbine which generates electricity that can be transmitted to the electric power grid. But unlike other technologies, Cratech's unique system is less complicated, more efficient, and designed to be ...
-
Manufactured by WastAway, LLCbased in USA
The war on coal and other greenhouse-gas producing fuels has intensified over the past decade. Emissions thresholds and prohibitions against construction of new coal-fired power plants have expedited the search for alternative energy sources that are renewable and ...
-
Manufactured by Emporia Corpbased in USA
The Emporia Electric Vehicle EV Charging Station is a Level 2 electric vehicle charger that charges any EV up to 40 amps with NEMA 14-50P or up to 48 amps with hardwired installation. It comes with a 24’ cable (from charger to tip of gun) with an SAE J1772 connector so it works with all electric cars. Its watertight NEMA Type 4 enclosure is made to withstand the elements ...
-
based in USA
Liberty Tire sells more tired-derived fuel (TDF) than any other tire processor in the U.S., conserving vast amounts of natural ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you