Semiconductor Analysis Equipment Supplied In Australasia

AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...

RG2 and RG4 incremental encoder systems have a strong reputation established over many years for providing highly-reliable position feedback, even in conditions considered unsuitable for most open, optical linear encoders. They all feature the original Renishaw state-of-the-art filtering optics, with excellent immunity to dust, scratches and light oils on the scale. These systems are fitted as ...

A diode is a 2-terminal device. Its salient feature is that it conducts current in one direction (acting as a closed switch) and blocks in the opposite direction (open ...

In order to dispose of critical exhaust gases and liquid residues safely and completely in the face of increasingly stringent thresholds, systems based on a combination of different technologies are needed. The Oxi.X DF incinerator for exhaust gases and liquid residues is the ideal solution in these situations. This type of system can also dispose of explosive exhaust gases without problem. It is ...

Helps to reduce the number of maintenance shutdowns, increasing the potential for lower cost of ownership. Optimized for extended pad and disk life. Diamonds secured with both chemical and mechanical bonds for superior retention.Highly engineered pad conditioners deliver reliable performance for critical semiconductor CMP applications. Utilizes Sintered Abrasive Technology for superior ...

GTOs (Gate Turn-off Thyristors) are optimized for low conduction losses. The typical on-off switching frequency is in the range of 200 - 500 hertz for most applications. GTOs are, by nature, relatively slow switches. Typical transition times from on to off state and vice versa are in a range of 10 - 30 microseconds. All GTOs require protective networks called "snubbers" for turn-on and turn-off. ...

Thyristors are "normally-off" switches that can be triggered "on" by a small current pulse into the gate electrode. Once turned on (or "triggered"), the component then stays in the conducting state even when the gate on-signal is removed. It only returns to the "off" (blocking) state if the current falls below a certain minimum or if the direction of the current is ...

A PV module (or PV panel) is made up of several photovoltaic cells. When exposed to sunlight, these cells produce a small direct current of electricity, and can generate a large amount of electrical power when installed as multiple arrays, with no moving parts, noise or CO2 emissions. The PV cell takes advantage of the photoelectric effect at the atomic level. The cells are constructed of ...