Photovoltaic Testing Equipment Supplied In USA

With close to 30 GW of our award-winning solar tracker commissioned on five continents, NEXTracker has earned the number one global market share position for four consecutive years. (2015, 2016, 2017, 2018 Greentech Media). Tracking the sun was never more precise, more efficient, and more reliable. Powered by NEXTracker’s self-powered motor drive, each row of solar panels can now be built ...

The Atonometrics Continuous Solar Simulator and Light Soaking Chamber provides simulated sunlight exposure for steady-state testing of photovoltaic (PV) modules. The system can be used for various tests requiring medium or long-term exposure, including photo-induced degradation, power output stabilization, hot-spot testing, and accelerated performance ...

Our UV Exposure System provides ultraviolet (UV) light exposure for accelerated life testing of photovoltaic (PV) modules. The system can be used for UV pre-conditioning required by IEC 61215 and 61646 for PV module testing. A unique design with two large vertical test planes allows for the simultaneous exposure of 2 to 6 PV modules of typical sizes. High throughput, small equipment footprint, ...

OAI's TriSOL Solar Light Meter is an essential measurement tool for measuring the irradiance in "suns" of both Flash and Continuous Wave Solar Simulators. OAI's instruments have unique features not found in other Solar Light Meters. This versatile meter can display reference cell characteristics, including cell type, window type, cell size, and temperature measurement device type. The OAI Solar ...

HT9023 has been designed to measure AC, DC AC+DC current up to 1000A in TRMS reaching CAT IV 600V and CAT III 1000V in compliance with safety standard IEC/EN61010-1. The clamp also measures DC voltage up to 1500V, AC, AC+DC voltage up to 1000V, Active, Reactive and Apparent Power, Power Factor, Energy, voltage/current harmonic analysis up to the 25th with THD% calculation in balanced single-phase ...

The programmable DC power supply family from EA range in power from 80W benchtop devices up to 30kW in a single chassis. High power density units can be easily paralleled up to 1,92MW in output, with up to 2000 VDC. All EA Elektro-Automatik DC programmable power supplies feature true Autoranging which automatically offers increased current at lower voltages, enabling a single supply to meet wider ...

PV cell manufacturing begins with the ultrasonic cleaning of silicon wafers followed by the chemical treatment of the wafer surface, which reduces the PV cell"s reflection of sunlight. Through a thermal process, or a diffusion process, we then introduce certain impurities into the silicon wafer and form an electrical field within the PV cell. Then an anti-reflection coating is applied to the ...

Features: Set of black and red MC4 to 4mm adapter test leads for solar applications. The black lead is a MC4 (female) to 4mm sheathed banana plug on a 60-inch test lead. The red lead is a MC4 (male) to 4mm sheathed banana plug on a 60-inch test lead. Allows for connections to test tools that accept 4mm sheathed banana plugs. Ensures safe current and voltage measurements on Photovoltaic (PV) ...

Features: • Set of black and red MC4 Solar Power Clamp Test Leads. • The black test lead is a MC4 (male) breakout to 12-inch MC4 (female) and 36-inch 4mm sheathed banana plug test lead. • The red test lead is a MC4 (female) breakout to 12-inch MC4 (male) and 36-inch 4mm sheathed banana plug test lead. • Designed for use with Solar Clamp Meters that accept 4mm sheathed banana ...

Multifunction instrument for testing and verifying single-phase PV installations. SOLAR I-V has been designed to meet any requirement of photovoltaic installation testers. Further to providing the possibility of testing and measuring the efficiency of single-phase photovoltaic systems and also measures the I-V characteristic both of a single module and of module strings. Thanks to SOLAR I-V, the ...

OAI offers a complete line of I-V Testers. Every I-V Tester can be ordered as a stand-alone system or integrated into any of theTriSOLSolar Simulators. Three standard ranges of I-V Testers are available; 1A and below, 1 to 5A, and 5 to 10A. Higher current testers are available as custom options. An OAI Application Engineer will work with you to insure that the I-V Tester you choose is optimized ...

HT204 is a digital solar meter for measurements of solar irradiation up to 2000W/m2, which can be used as an inspection device, typically in photovoltaic ...

I-V400w allows field detection of I-V Curve an of the main characteristic parameters both of a single module and of strings of modules for PV installations up to a maximum of 1000V and 15A. For measuring I-V Curve, I-V400w manages an internal database of the modules, which can be updated at any time by the user and comparison between the measured data with the rated values allows immediately ...

I-V525w allows field detection of I-V Curve an of the main characteristic parameters both of a single module and of strings of modules for PV installations up to a maximum of 1500V and 10A or 1000V and 15A. For measuring I-V Curve, I-V525w manages an internal database of the modules, which can be updated at any time by the user and comparison between the measured data with the rated values allows ...

The Atonometrics Multi-Channel I-V Measurement System measures the current-voltage relationships (I-V curves) of photovoltaic (PV) ...

The PV-KLA photovoltaic I-V curve analyser is a versatile measuring system for recording the current-voltage characteristic of photovoltaic modules and cells in both research and industrial settings. It is flexible enough for both indoor and outdoor use. Several of these devices can be found in the quality assurance departments of German and international photovoltaic module manufacturers, as ...

Available in conventional and regenerative, DC electronic loads from EA Elektro-Automatik boast high power density and premium features not found on typical loads. Offering input power ratings up to 15kW in 3U or 30kW in 4U chassis with max 2000 VDC. Easily parallel operation for almost 1.92MW of power. Regenerative ELRs reduce heat, noise and HVAC costs. All of EA’s DC power supplies and ...