Solar Energy Equipment Supplied In Poland

The SPN1 Sunshine Pyranometer is a precision solar radiation measurement instrument with a ground glass dome, and is designed for long-term outdoor exposure. It is an affordable and effective alternative to shade-ring pyranometers, pyrheliometers and traditional sunshine ...

Greater solar cells with greater module efficiency on your roof. Nominal Power: 410 Wp. Efficiency: Up to 20.93%. Maximum System Voltage: 1500 V. Snow/Wind Load: 5400/2400 Pa. Dimensions: 1726 mm × 1135 mm × 35 mm. Weight: 21.5 ...

Install Options: vertical or horizontal. Casing: Bended, powder-coated, aluminum frame. Bottom: Aluminum plate connected to frame with help of a glue and screws. Type of pane: Solar hardened glass with low iron oxide content and prism structure. Connected to frame with help of a glue and mask board. Absorber form: single or double harp. Absorber type: Copper, coated with high selective titanium ...

Light power: 24 watt. Solar panel: 100 watt. Battery: 12 volt, 72 Ah. Active 16 hours per night. 3 night Saving energy ...

Type HP solar panels are manufactured in the HEAT PIPE technology which ensures high reliability even during long periods of stagnation, or during high solar radiation. The use of HP solar collectors ensures heating support at the highest level, as in the summer time there is no risk of boiling, as with traditional ...

Termsol Eko heat transfer fluid is a solution of water and non-toxic polypropylene glycol at 33% concentration. It also contains a set of inhibitors, which guarantee anticorrosion properties and extend longevity of the mixture and the whole solar installation. The freezing temperature is -25°C. Available in the size of ...

The Model 831-INT provides the 426A12 outdoor microphone with both electrical power and control commands for its electrostatic actuator, temperature and humidity readout. The Vaisala WXT520 (SEN031) weather sensor is connected to the Model 831-INT for wind speed and direction, temperature and humidity, barometic pressure, rain and ...

Structural material: Aluminium. Module orientation: horizontal. Angle of inclination: 15-30°. Weight of mounting structure for 1 PV panel: 26 kg. Total weight of mounting system with PV panels: 50 kg/m2. ...

Beautifully designed M10, high efficiency, solar panels.. Nominal Power: 400 Wp. Efficiency: Up to 20.42%. Maximum System Voltage: 1500 V. Snow/Wind Load: 5400/2400 Pa. Dimensions: 1726 mm × 1135 mm × 35 mm. Weight: 21.5 ...

Maximum energy production with exceptional reliability. Nominal Power: 370 - 380 Wp. Efficiency: Up to 20.48%. Maximum System Voltage: 1000 V. Snow/Wind Load: 5400/2400 Pa. Dimensions: 1767 mm × 1050 mm × 35 mm. Weight: 21 ...

Beautifully designed high performance solar panels. Nominal Power: 365 - 370 Wp. Efficiency: Up to 19.94%. Maximum System Voltage: 1000 V. Snow/Wind Load: 5400/2400 Pa. Dimensions: 1767 mm × 1050 mm × 35 mm. Weight: 21 ...

The KS2000 TP flat plate solar collectors are intended for hot domestic water systems in single-family homes and apartment houses, as well as commercial, industrial, and other buildings. They can also be used for heating pool water and to support central heating systems in single-family homes. ...

Collector efficiency: 83,6%.Install Options: vertical or horizontal.Casing: stainless steel.Supporting structure: aluminum.Pipe glass: hardened glass 1,8mm thick coated anti-reflexive layer.Absorber type: Copper, coated with high selective titanium and quartz layer.Available sizes (gross): 1,7; 2,19 m2.Totally area: 1,7; 2,19 m2.Absorber area: 0,83; 1,12 m2.Available certificates: “B” ...

System mounted directly to the roof surface (without the need of ballast ...

This collector is suitable for thermosiphon systems with higher level supplying cold water tank, and for forced systems (direct or indirect pressurized or non-pressurized systems). It consists of evacuated glass tubes connected vertically to a stainless steel collector. It’s insulated with high-quality polyurethane wrapped with galvanized coated steel or stainless steel. It’s possible to connect ...

SELFA is a self-contained, Polish manufacturer of photovoltaic modules. Our experience in photovoltaics is supported by cooperation with research institutes and our own research work.Our modules are made on modern, automated production line, while maintaining a high aware on quality at every stage of its production. Using high quality materials from a well known and valued suppliers, we can ...

Modular construction. Easy plug & play installation. Easy integration (works with inverters available on the market). Scalability: Scalable every 4,4 kWh. Can be used in 1-phase and 3-phase installations. Long use ...

Cobrex is a straight, shell and double wall tube, heat exchanger with visual leak detection. A one-pass vertical design, it is constructed entirely of pure copper with internally corrugated tubes, and closely spaced directional baffles, for maximum heat transfer. Cobrex is an ideal solution for tankless instantaneous, and semi-instantaneous, hot water generation. ...

In the interest of our customers we have developed complete solar sets. Their parameters have been precisely calculated and the sets themselves appriopriately tested. They are designed to heat tap water and to suport central heating. Our kits contain all the necessary elements, often including those which many competitors do not take into account. Our collectors are characterized by robust and ...

High-temperature resistant, maintenance-free bearing with steel backing. NORGLIDE H-type is a composite material based on the design of NORGLIDE T bearings (tape and steel backing). Besides the properties of standard NORGLIDE T in terms of tolerances and noise vibration harshness (NVH), the H marks the material as high temperature resistant. Therefore, the H-type is the appropriate material for ...