Add your articles Subscribe

Solar Thermal Plants Articles & Analysis

18 articles found
  • What is the difference between photovoltaic power station and solar thermal power station?

    Solar thermal power is a technology that converts light energy into heat energy and then generates electricity by doing work through a conventional thermal cycle.Solar thermal power is a technology that converts light energy into heat energy and then generates electricity by doing work through a conventional thermal cycle.Solar thermal power produces the same alternating current as conventional ...

  • Egypt set to pick supplier for first CSP plants; Azteq installs Europe’s first industrial solar thermal plant

    Egypt advances plan for five new CSP plants The Egyptian government and Cairo-based Smart Engineering Solutions are moving ahead with a plan to build five CSP plants for a total capacity of 250 MW, Egyptian media reported earlier this month. Smart Engineering Solutions plans to select the preferred technology supplier from a shortlist of 16 companies by the end of November, Osama Kamal, the ...

  • Centrifugal CSP could offer siting breakthroughs, $60/MWh power

    A new ceramic particle CSP receiver soon to be tested in the U.S. could lower the cost of energy by up to 20% and accelerate industrial heat deployment through particle transport innovations, Reiner Buck, Head of Solar Tower Systems at German Aerospace Centre (DLR), told New Energy Update. Last month, the U.S. Department of Energy allocated $750,000 of funding to Sandia National Laboratories ...

  • Solar Thermal Power Plants

    THE BENEFITS OF SOLAR THERMAL POWER PLANTS Solar thermal energy production requires two main things: sunlight and equipment to capture, store and disperse the energy. Only two types of solar thermal systems exist. They are the passive systems, which do not require equipment (such as the heat build-up in your car whenever you park it in the sun), and active systems which require a method to ...


    By Artic Solar, Inc

  • Economics of tiny thermal power plants

    Thermal power plants is the main source of energy and electricity in India and almost all countries of the world. Most of the giant thermal power plants have capacity of 500MW to 1000 MW. Investment in such giant thermal power plants is Rs 100 million per MW including transmission lines and distribution lines. ( 60 rupees = 1 US$, MW=1000KW). So 1000MW thermal power plant costs Rs 100 million/MW ...


    By Tinytech Plants

  • Can the Solar Hourglass serve as a CSP landmark?

    A CSP project proposal has won first place in the 2014 Land Art Generator Initiative (LAGI) competition, but can the design make it beyond paper? By Heba Hashem October was an eventful month for Santiago Muros Cortés. The Argentina-based architect impressed the jury in Copenhagen with his plan for a Solar Hourglass that would use a solar beam instead of sand as a trickling material. The ...

  • CSP and mining in Chile

    With a mining industry that produces 35% of the world´s copper, it is imperative for Chile´s economic growth to produce energy from a source that is secure, dispatchable and unlimited. In an exclusive online webinar last week, hosted by CSP Today, experts discussed the positive impact that solar CSP could have on Chile’s mining industry. With many mining markets located in ...

  • CSP Thermal Energy Storage vital for utilities and grid operators

    The modern age of CSP can arguably be traced back to the 354MW Solar Energy Generating Systems (SEGS) in the Mojave desert, which now make up the oldest operating plant in the world, as well as one of the largest. However, recent developments in the industry will see SEGS eclipsed by 5 projects that are scheduled to come online in 2013-14, with a combined total of 1312MW. The five plants in ...

  • Determining performance characteristics crucial for CSP

    As the development of large-scale CSP projects begins in the United States, the ability to accurately determine the performance characteristics in the efficiency, heat losses and overall power output of plants under operation is essential for generating widespread confidence in CSP technologies. After more than 10 years in hibernation, parabolic trough technology has been revived again with ...

  • Determining performance characteristics crucial for CSP

    Why is the performance testing of newly developed plants important for the future of large scale projects in the US? As the development of large-scale CSP projects begins in the United States, the ability to accurately determine the performance characteristics in the efficiency, heat losses and overall power output of plants under operation is essential for generating widespread confidence in ...

  • Coal-fired power on the way out?

    The past two years have witnessed the emergence of a powerful movement opposing the construction of new coal-fired power plants in the United States. Initially led by environmental groups, both national and local, it has since been joined by prominent national political leaders and many state governors. The principal reason for opposing coal plants is that they are changing the earth’s climate. ...


    By Earth Policy Institute

  • U.S. headed for massive decline in carbon emissions*

    For years now, many members of Congress have insisted that cutting carbon emissions was difficult, if not impossible. It is not. During the two years since 2007, carbon emissions have dropped 9 percent. While part of this drop is from the recession, part of it is also from efficiency gains and from replacing coal with natural gas, wind, solar, and geothermal energy. The United States has ended ...


    By Earth Policy Institute

  • Charting economic climate

    The economic climate affects our day-to-day lives. Work activities are intricately interconnected with social well-being which in turn effects family harmony and trickles on down to impact personal wherewithal. Still, 'climate' is what it is. There is nothing any of us alone can do about it. At the same time, however, how we think about it tends to shift the reality we experience day to day. ...


    By Special-Lite

  • Create new jobs & cut emissions by investing in renewable energy efficiency

    At a time when major US companies are announcing job layoffs almost daily, the renewable energy industry is hiring new workers every day to build wind farms, install rooftop solar arrays, and build solar thermal and geothermal power plants. The output of industrial firms that manufacture the equipment for these energy facilities is expanding by well over 30 percent a year. These investments both ...


    By Earth Policy Institute

  • Solar thermal power plants for the Spanish electricity market

    Solar thermal power plants are at present the cheapest technology for solar electricity production. At good sites Levelised Electricity Costs (LEC) of 11 Ct/kWh have been achieved in commercially operated power plants. Economy of scale and further technical improvements will reduce the LEC for future projects. On the 27th of March 2004 in Spain the existing feed-in-law has been modified in order ...


    By Inderscience Publishers

  • A solar thermal power system in the city of Thessalonica with the use of the Pinch method for entropy minimisation

    The objective of this paper is to create a small power plant, (producing 2 MW annually), which will be using solar energy as a driving fuel. The system is made up of three sub-systems: a set of Solar Collectors (SCS), a Rankine power cycle and a Heat Exchanger Network (HEN). Two cases with variations in the operation of the solar collectors and the heat exchanger network will be examined. The ...


    By Inderscience Publishers

  • Solarthermal parabolic trough power plants with integrated storage capacity

    Parabolic trough power plants use concentrated direct insulation for steam generation in a Rankine cycle. The fundamentals for direct steam generation in parabolic troughs have been developed in recent years, the feasibility was successfully demonstrated at a solar powered test facility reaching steam temperatures of 400°C at a maximum pressure of 100 bar. Important components for the accelerated ...


    By Inderscience Publishers

  • Renewable energy technologies and the European industry

    The European renewable energy industry has the potential to be a world leader. This has been achieved within the European region for specific technologies, through a set of policy activities at a national and regional level, driven primarily by employment, energy self-sufficiency and industrial competitiveness. Using the experience gained in recent years, European industry has the opportunity to ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you