Waste-To-Energy Equipment Supplied In Spain

Based on the DTI Series, but with an adapted design for direct energy recovery (product vs product) for sludge with low viscosity. The inner tube is removable making it possible to inspect/clean both tube and shell side. It also allows for easier and faster cleaning consequently reducing operational downtime required for these high fouling products. The tube in tube concentric geometry makes it ...

ATI 22 alloy is a Ni-Cr-Mo alloy that provides outstanding resistance to pitting, crevice corrosion, intergranular attack, and stress corrosion cracking. The combination of Cr, Ni, Mo, and W provides excellent resistance to a broad range of both oxidizing and reducing ...

The success of separation using the ValorGas system is conditioned to an optimal biological desulphurisation pretreatment for impurities elimination present in the biogas, which are a limitation for the suitable use of the ...

Allow steam generation (saturated or superheated) and superheated water from flue of furnaces, gas turbines, waste liquid incinerators (HCL, H2SO4) or waste gas incinerators (Off-gas, biogas, SH2…), fuel-oil engines (2 stroke or 4 stroke), gas engines in cogeneration ...

The VOXsorbTherm system has been developed especially for lean VOC concentration (less than 200 mgVOC/Nm³) and periodically occurring waste gas streams. The system is regenerated in place by an accompanying oxidation ...

In 2009, INERCO developed the EPC for the CIUDEN Biomass Gasification Plant. This plant of 3 MWth and INERCO Technology, is located in the Technology Development Centre of CO2 Capture, in El Bierzo (León) in a village called Cubillos del ...

Islands and Resorts and remote sites present difficult challenges in clean and safe waste disposal. The Batch Gasifier can be sized for ocean transport, flown into very remote sites, or trucked in ready to operate with very little assembly. The system can even remain on a truck bed for portable ...

The focus of TRANSVIT is to provide low cost, practical waste gasification and energy recovery systems for the disposal of municipal and industrial solid waste. The municipal waste-to-energy systems feature expandable modules, each processing up to 400 tpd of waste, and generating up to 8 mega watts of electric power. We also provide larger industrial gasification systems up to 1500 tpd, and ...

The hot water boilers of series MARIO are designed for heating in small domestic and company buildings, as well as heating domestic hot water. The utilized fuel is: wood pellets of diameter 6mm up to 8mm, as well as dried cherry ...

AEREON's Cyclone Series Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to eventually combine with the process gas, which passes through its own secondary riser and is distributed at the flare tip through a proprietary AEREON Starfire burner tip. Upon mixing at the flare ...

Since the 1980’s, key staff of Nutara have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications. Nutara designs are optimized towards flexibility, robustness, low emissions, high thermal efficiency and ...

Industries will generate Low CV waste gases, which are either difficult to burn or can contain insufficient energy to self-sustain the combustion process. For these applications, Nutara developed the proprietary "ring-of-fire" Flare Tip. This tip has a ring of flame around the central waste gas tip thus ensuring complete oxidation of the low calorific waste gas. Both air assisted and non-assisted ...

The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...

Hydrogen sulfide or H2S is a lethal gas generated in refineries, petrochemical plants, and gas handling facilities. Sulfur recovery units produce tail gases that contain relatively substantial amounts of H2S. AEREON designs a special type of incinerator, designed to eliminate the H2S components, while inhibiting the creation of corrosive acid by-products. Systems of this nature typically include ...

AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...

AEREON's Momentum Series of non-assist flares provide smokeless performance without the need of additional air-blowers or assist gas for both high pressure and low pressure gas streams. Leveraging the increased momentum of gas that is passed through a simple nozzle or restricted opening, the waste gas intimately mixes with the ambient air and provides for smokeless operation while meeting all ...

Air Move 1500 is a fully automatic transportation of pellets with built-in daily storage Now the time is gone with carrying pellet bags from bulky storage rooms in the garden. Now you just press the button and pellets will be put in with careful air feeding. Our vacuum suction apparatus easily handles up to 50 meters from bulk storage to pellet burner. The screw that comes with it is also ...

Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). Reliable operation at both full load and partial load is ...

Air assisted flares enable the smokeless combustion of low pressure waste gases. Air (or Gas) assisted flares can be used when no steam is available on site. Air assisted flares use forced draft Air or Gas to create turbulence ensuring that sufficient primary combustion air is supplied to the flame. The amount of air and hence the size of the tip and riser depend on the degree of smokeless ...

This BATCH design is perfect for smaller applications. Each 10 ton chamber of this BATCH system is loaded full once per day, a 30 minute process. Thereafter, the chamber operates unattended and without disturbance of the waste pile for 23 hours. Emissions and ash quality are the best in the world. The white ash color shows close to 100% complete ...