Wind Energy Equipment Supplied In Quebec

Promark Electronics designs and builds custom wire harnesses that can withstand the most challenging environments and specifications. Our Value Engineering department is dedicated to finding the right product for each of your applications. Our sole focus is to develop a reliable, cost-effective custom wire harness tailored to your exact needs. Information: susan Whatsapp/signal/telegram: +44 7745 ...

The M-21 is a workhorse for your microgrid, designed and built for the most extreme climates in the most remote locations—strong gales in northern Scotland, humid trade winds in the Pacific, icy winds in Alaska and hot thunderstorms in Singapore. A tilt-up tower makes the M-21 100% ...

In wind energy, Elecnor has not only built numerous turnkey wind farms throughout Spain for various developers, but also acts as a developer and operator through its subsidiary ...

Feasibility studies. Cost-finance analysis. Project administration procedures. Permitting and planning management. Construction and detailed engineering project design. Turnkey construction. Operation and maintenance. Operations ...

Opsun SunRail is a versatile platform, not a fixed product : we can design a rack at any tilt, any height, any interrow distance, with any PV module, framed or frameless, landscape or portrait. Open design allows for easy roof access for maintenance, and lower PV operating temperatures. ...

All rails on the edge of the PVs, not under them. No component blacking the backside of the panels. The Opsun SunGround Bifacial system is designed to maximize the amount of light the backside of the panels receives. ...

This architectural solar canopy combines high energy generation without compromizing the look of the structure. Using frameless bifacial PVs will add to the elegance of the canopy and will blend perfectly in residential as well as light commercial installations. ...

Batteries are objects familiar to all, and utility-scale batteries used in energy storage systems are not much different from batteries we use in our every day lives, like in our cellphones or computers. Battery Energy Storage Systems charge and discharge energy at different times of the day, providing a service. Utility-scale batteries are stationary and connected to the grid, usually near a ...

At times of low energy demand, with associated low costs, the High-Density Fluid R-19 is pumped to the top storage tanks. The low-cost electricity is often provided by abundant renewable energy, such as wind and solar power. As energy prices rise the HD Fluid R-19 is released and it passes through the turbines, regenerating electricity to supply power to the grid. Because we use a high-tech fluid ...

Hydroguard provides both insulation and lightweight ballasting for PMR assemblies. Composed of 2 ft. x 4 ft. Styrofoam™ panels topped with latex modified concrete and tongue and groove edges along the long sides allow each board to be interlocked during installation, creating a continuous layer of thermal protection. Hydroguard acts as a durable barrier, protecting the roofing membrane from ...

Our designers and engineers can create a tilted roof racking as you envision. Typical designs can be flush (0 deg. tilt), or tilted at 5 to 30 deg., landscape or portrait. Any common roof type. Structure can be one, two or even three layers to accommodate any construction type. ...

Instead of placing panels flush on tilted roof, Opsun SunRail BifacialTM allows to place the panels at an angle on the tilted roof, allowing for better natural cleaning and increasing significantly yield by adding bifacial gains. Open design allows for easy roof access for maintenance, and lower PV operating temperatures. ...

Our designers and engineers can create a tilted roof racking as you envision. Typical designs can be flush (0 deg. tilt), or tilted at 5 to 30 deg., landscape or portrait. Any common roof type. Structure can be one, two or even three layers to accommodate any construction type. ...

All wires hidden, all junction boxes hidden. Zero obstruction on the back of the cells (if junction box position allows). Optimized for bifacial. Superb look with frameless, low-profile panels. Will look neat from ...

The 200-WS-23 Current Loop Wind Sensor monitors wind speed and direction. The electronics converts the raw signals from the wind sensors to proportional 4 to 20 mA current loop values for use by process control or monitoring systems. It acts like a variable resistance that draws 4-20 mA when powered with 8 to 30 Vdc. No external power is required because the encoding electronics for wind speed ...

The 200-03002 Wind Sentry Anemometer and Vane are professional quality wind sensors which are suitable for a wide range of wind measurement applications. These moderately priced sensors are principally of thermoplastic construction providing excellent corrosion resistance, low sensor weight, and minimal parts count. In addition to being available as a set complete with crossarm, the sensors are ...

The PVMet 330 is a complete monitoring experience with our full range of sensors to optimize PV power generation. The PVMet 330 includes an option for both a Global and Plane-of-Array Irradiance Sensor, one or two Back-of-Panel Temperature Sensor(s), an Ambient Air Temperature Sensor, a Wind Speed and Direction Sensor, a Relative Humidity Sensor, a Barometric Pressure Sensor, and a Rain Gauge ...

The PVMet™ 500 delivers a customizable, multi-point monitoring solution that provides reliable energy management on any solar project. Choose up to three Irradiance Sensors and three Back-of-Panel Temperature Sensors along with three standard sensor options and an optional Ultra Sonic Anemometer, Mini Aervane, or Rain Gauge. Simple to install on any solar project, the PVMet 500 connects to ...