Wind Energy Equipment Supplied In Canada
-
Manufactured by Energy Systems & Design (ES&D)based in CANADA
New! Injection Molded housing with drip lip! In the 1970’s Paul Cunningham, owner and operator of Energy Systems & Design, had a need to power his off-grid house. He set off on a mission to create an efficient and reliable micro hydro machine. Utilizing a car alternator type micro hydro machine and the wheels he cast himself, he created the first machine. Through many hard-working ...
-
Manufactured by Energy Systems & Design (ES&D)based in CANADA
The LH1000 is specifically designed machine to operate efficiently in low-head sites. It takes advantage of the same generator as the Stream Engine, however the water turbine component uses a low head propeller design. The LH1000, is designed to operate in conjunction with battery based power systems, storing electrical power for use at times when consumption exceeds ...
-
by e-Zincbased in CANADA
e-Zinc’s technology is a paradigm shift in energy storage. By storing electrical energy within zinc metal, the system can store hundreds of hours of energy capacity while being significantly cheaper than battery technologies. This has the potential to dramatically improve the value proposition of intermittent, renewable electricity sources such as wind and solar. The figure below ...
-
Manufactured by Alkaline Fuel Cell Powerbased in CANADA
Tailored for the residential and small/medium sized power markets; Hydrogen powered alkaline fuel cell technology with zero CO2 emissions; Price leading fuel cell manufacturing technology allows for high volume production; Designed to fill the increasing consumer demand trend for clean energy; Unique and competitive component design stands out from the ...
-
Manufactured by R.L. Components Ltd.based in CANADA
R.L. Components has been manufacturing transformers, reactors, and numerous other coils and windings for the high voltage T & D industry since the 1970s. R.L. Components also has the capabilities to do complete coring, installations and testing in order to provide a finished ...
-
Manufactured by Borrum Energy Solutions Inc.based in CANADA
The Anorra home wind turbine is designed to offset your electricity costs, reduce your carbon footprint, and survive the toughest of Canadian climates. Our design is 100% Canadian, and 85% of our parts are sourced in Canada. ...
-
Manufactured by NovaLynx Corporationbased in USA
The 200-03002 Wind Sentry Anemometer and Vane are professional quality wind sensors which are suitable for a wide range of wind measurement applications. These moderately priced sensors are principally of thermoplastic construction providing excellent corrosion resistance, low sensor weight, and minimal parts count. In addition to being available as a set complete with crossarm, the sensors are ...
-
Manufactured by Advanced Energy Industries, Inc.based in USA
Superior accuracy, 100-hour battery life, and a 3-year warranty. TRUST is an essential feature in any measurement tool and TEGAM’s new 700 Series bond meters and milli-ohmmeters are instruments you can rely on every day with confidence. These new models are designed with the clearest and most informative displays for mistake-free measurements. They quickly produce accurate readings to ...
-
Manufactured by Advanced Energy Industries, Inc.based in USA
Everything needed for performing grounding & bonding tests in one convenient package. TRUST is an essential feature in any measurement tool and TEGAM’s new 700 Series bond meters and milli-ohmmeters are instruments you can rely on every day with confidence. These new models are designed with the clearest and most informative displays for mistake-free measurements. They quickly produce ...
-
Manufactured by Nomadic Systems Inc.based in CANADA
NOMADIC™ is now offering containerized Power Generators using diesel or propane. These generators are designed to to power the entire camp or just the potable water and sewage treatment system. ...
-
Manufactured by CAP Solar Pumps Ltd.based in CANADA
Can be adapted to an underground pressure line in any location. Can be expanded to operate as a stand-alone solar/wind powered base. Tank capacity of 30 imperial gallons. Heat source is a flameless catalytic heater using LPG (propane fuel). PROPANE FUEL CONSUMPTION = 1.5 lb/day. Recycles heated exhaust and vapour back into top of ...
-
Manufactured by Briggs & Stratton Corporationbased in USA
The Big Genny is a portable, rechargeable battery-powered generator of AC power. It stores electricity from any power source – grid, solar, wind – when access to AC power is not available, such as power outages and emergencies. It is a silent, non-toxic, cobalt-free, power supply that can be used anytime, anywhere to charge cell phones, tablets, laptops, fans, small appliances, and ...
-
Manufactured by Briggs & Stratton Corporationbased in USA
The Little Genny is a portable, rechargeable battery-powered generator of AC power. It stores electricity from any power source – grid, solar, wind – when access to AC power is not available, such as power outages and emergencies. It is a silent, non-toxic, cobalt-free power supply that can be used anytime, anywhere to charge cell phones, tablets, laptops, fans, lights small ...
-
Manufactured by YSI Incorporated - a Xylem brandbased in USA
The dual set point Wind Alarm Controller provides both warning for and control of wind-sensitive equipment, cranes, water fountains, etc... Can be used to alert you to high or low wind speeds and can be factory calibrated in MPH, km/h or ...
-
Manufactured by DeTect, Inc.based in USA
DeTect specializes in delivery, integration and support of advanced, proven bird monitoring systems for wind energy project developers, owners, operators and environmental consultants for bird and bat survey, mortality risk assessment, operational monitoring and real-time risk mitigation with over 250 systems delivered ...
-
Manufactured by Triple Green Energybased in CANADA
Green Air Heat is a forced air biomass heating system that utilizes natural resources to create heat. This results in drier air, healthier poultry and increased profits for producers. Furnaces range in size from 100,000 – 4,000,000 BTU fully automated systems with auto ash removal. The refractory lined fire chamber can burn multiple biomass fuels with 50% fuel moisture including poultry ...
-
Manufactured by Free Breeze Energy Systems Ltdbased in CANADA
Free Breeze offers re-manufactured V80's with the same warranty as new. It has always been a premier performer in its class, and has made it the turbine of choice for a wide variety of applications, including wind farms and community power projects. Not surprisingly, an acclaimed pedigree has laid the foundation for the turbine's consistent performance and efficient ...
-
Manufactured by American Hydrotech, Inc.based in USA
Hydroguard provides both insulation and lightweight ballasting for PMR assemblies. Composed of 2 ft. x 4 ft. Styrofoam™ panels topped with latex modified concrete and tongue and groove edges along the long sides allow each board to be interlocked during installation, creating a continuous layer of thermal protection. Hydroguard acts as a durable barrier, protecting the roofing membrane from ...
-
based in USA
Designed for IEC Wind Class IIIs, GE’s 2.75-120 wind turbine features a 120-meter rotor in combination with the proven single-blade pitch control. The 2.75-120 offers the latest enhancements in load management controls, low acoustic emissions, efficient electrical power conversion and robust ...
-
based in USA
Building on its exceptional turbine performance and reliability, GE's Class I 1.5-77 wind turbine. GE advanced its original Class I wind turbine, the 1.5-70.5, with increased rotor length, and controls technology resulting in a greater annual energy production. Focusing on performance, reliability, efficiency, and multi-generational product evolution, GE's Class I 1.5-77 wind turbine continues to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you