Microturbines Equipment & Supplies In Africa
-
Manufactured by Biorem Technologies Inc.based in CANADA
Biogas emissions provide a valuable potential source of recoverable energy. However the presence of hydrogen sulfide (H2S) in biogas can restrict its use as it will adversely impact downstream equipment and cause SOx emissions in thermal combustion of the gas. In addition, the presence of H2S can lead to issues with health and safety as well as cause a potential off-site nuisance condition for ...
-
Manufactured by Capstone Green Energybased in USA
Expandable Can be paralleled up to 30MW of power. Your location could not be detected. Please allow www.capstoneturbine.com to detect your location to find the distributor that services your region. If you previously blocked CapstoneTurbine from knowing your location, click the location marker symbol in your address bar to fix ...
-
Manufactured by AIR ® Wind Powerbased in USA
AIR 40 is the premier micro-wind turbine for land-based applications. It operates efficiently across a wide-range of wind speeds, providing energy for telecom, water pumping, lighting, SCADA, off-grid homes, or other low energy demand battery charging applications. The AIR 40 is ideal for pairing with solar to offset seasonal variation, delivering more consistent ...
-
Manufactured by Capstone Green Energybased in USA
Can be paralleled up to 30MW of ...
-
Manufactured by Martin Energy Group, LLCbased in USA
A heat recovery steam generator (HRSG) is an energy recovery heat exchanger that recovers heat from a hot gas stream. It produces steam that can be used in a process (cogeneration) or used to drive a steam turbine (combined ...
-
Manufactured by Ensto Groupbased in FINLAND
The operating data exchange system (D.E.I.E.) is a control/monitoring unit that manages the remote control and monitoring of decentralised generating installations. Control cabinet for local spot generation, with measurements capacity for Wind mills, Photovoltaic generation, Micro generation, Gas turbine, Hydraulic ...
-
Manufactured by McMillan Companybased in USA
McMillan S-Series FLO-METERS are capable of measuring extremely low liquid flow rates from 13 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a well-deserved ...
-
Manufactured by BOSALbased in BELGIUM
BOSAL Energy has 20 years of experience in development, testing and production of highly effective heat exchangers. BOSAL Energy is part of the BOSAL group which was founded in 1923 in the ...
-
Manufactured by Imam Ambiente s.r.l.based in ITALY
Vertical or Horizontal Wind Turbines use the kinetic energy of the wind to generate electricity. First kinetic energy is converted into mechanical energy, which is then converted by a generator to electrical energy. The efficiency of wind turbines depends on 3 major factors: wind power, blade aerodynamics and air density. Generator can be connected directly to the rotor winding (Direct drive), or ...
-
Manufactured by Marlec Engineering Company Ltd.based in UNITED KINGDOM
Experience the powerful but quiet operation of the new Tri-namic profile blade. Our latest turbine, the Rutland 1200, is the ideal companion for generating energy on board, read on to find out why it is the most technologically advanced micro wind turbine and controller in its ...
-
Manufactured by Adicomp S.r.l.based in ITALY
This extraordinary range designed for the compression of METHANE GAS is particularly indicated for all the applications which require pressures in use from (3-15 Bar) with flow rates up to 2500 Nm3/h. Adicomp has developed a series of compressors ideal for any kind of application depending on the models and needs. Typical is the application combined by methane-fuelled Microturbines for ...
-
Manufactured by Guangzhou Electway Technology Co., Ltd.based in CHINA
It is widely used in hydro power stations with the head of 3--50 meters. Francis turbine is one of the most widely used turbines. It has a compact structure, reliable operation and high efficiency, and can be used at different ranges of water flow. Large-sized Francis turbines are commonly used at hydraulic head range of 20-700m. ...
-
Manufactured by Technopa GmbHbased in AUSTRIA
Steam to energy transformer. Micro steam turbine & generator module. Wet steam turbine operation. Plug and produce ...
-
Manufactured by Technopa GmbHbased in AUSTRIA
Steam to energy transformer. Micro steam turbine & generator module. Plug and produce ...
-
Manufactured by McMillan Companybased in USA
McMillan Model 104 FLO-SENSORS are capable of measuring extremely low liquid flow rates from 13 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a ...
-
Manufactured by McMillan Companybased in USA
McMillan Model 106 FLO-SENSORS are capable of measuring extremely low liquid flow rates from 15 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a ...
-
Manufactured by ESPE Groupbased in ITALY
The ES3 Micro Wind turbine is the smallest turbine in the ESPE Wind range and is ideally suited for remote access sites, small domestic properties, telecoms and off-grid applications. Offering an unrivalled 25+ year track record, the KW3 is amongst the most sought after small wind turbine in the ...
-
Manufactured by ESPE Groupbased in ITALY
ESPE is the most popular turbine in our range, regarded by many as the turbine of choice. Ideally suited for rural domestic, farmers, land owners and light industrial applications. It is fully certified under the Microgeneration Certification Scheme (MCS), and is therefore eligible for Feed-in Tariffs and Regional ...
-
Manufactured by Dongturbo Electric Company Ltd.based in CHINA
Typical Cases For Micro Hydro Turbine Generator Unit Case 3-50KW Kaplan Hydro Turbine Generator ...
-
Manufactured by Cryo Purbased in FRANCE
Production of LNG as an alternative to flaring gas at oil production sites. Adapted to the recovery of associated gas at small-scale oil wells, the Cryo Flare solution enables to eliminate flare gas and to create extra revenues by producing LNG (and LPG) which can be easily transported and sold to remote markets. It is an environment-friendly alternative to routine flaring of small gas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you