Power Plant Equipment Equipment & Supplies In Ohio
-
Manufactured by O.C.R.E.M. srlbased in ITALY
O.C.R.E.M. is a reference point for the construction of generator sets for single machines and power plants. Continuous investments in technology combined with constant attention to researching and developing new solutions have earned the company a leading position in the production of 3 to 2,500 kVA generator sets. The engines used in constructing the generator sets are furnished by leading ...
-
Manufactured by DEWESoftbased in SLOVENIA
The Dewesoft solution can measure all the power quality parameters according to IEC 61000-4-30 Class A. In comparison to other power quality analyzers it’s possible to do more detailed analysis (e.g. raw data storing, behavior at faults, calculation of additional parameters ...
-
Manufactured by KRAL GmbHbased in AUSTRIA
KRAL fuel consumption measurement takes into account the effects of the engine system and delivers highly accurate measured values. Generators establish the guaranteed, specific fuel consumption during the warranty period. If fuel consumption is too high, this always indicates that the engine is badly adjusted or needs ...
-
Manufactured by Zeno Pellet Machine - Zhengzhou Zeno Machinery Co.,LTD.based in CHINA
Wood pellet plant https://www.zenopelletmachine.com/product/wood-pellet-production-line/ is the latest pellet machinery on the world. The biomass wood pellet machine adopts a large modulus hard toothed helical gearbox, strengthened spindle, strong power output, equipment stable operation, low failure rate, low production cost. Pellet Making Machine suitable for: eucalyptus, pine, birch, poplar, ...
-
by BossPacbased in CANADA
BossPac's Dark Network Communication (DNC) technology addresses the issue of gaps in data collection within network monitoring systems. This innovative technology facilitates the transfer of data from a variety of sensors, including fixed, mobile, and quick-deploy types, through stations that operate primarily on solar power with a non-rechargeable backup power system. DNC stations are engineered ...
-
by Jonas Inc.based in USA
Flow-accelerated corrosion (FAC) is the combined actions of corrosion and erosion in the presence of a moving fluid (liquid water or wet steam), resulting in the loss of material and localized reduction of wall thickness. The geometry of each piping component and the temperature of the fluid are the major influences on the rate of FAC. The highest wear rates are around 150°C (300°F). ...
-
Manufactured by Arzon Solar, LLCbased in USA
The 8700 is the world’s highest performance, highest efficiency utility scale PV generator.The 8700 is 30% lower cost and 10% higher power and energy performance then Amonix’s former utility product, the 7700. Over 60 MW DC of 7700 systems were deployed from 2009 till 2012 and demonstrated the highest energy density of any project studied in a 2013 NREL land use report, needing only ...
-
Manufactured by Ducon Technologies Inc.based in USA
Ducon mainly provides the following types of Flue Gas Desulfurization ...
-
Manufactured by Ducon Technologies Inc.based in USA
Ducon supplies both wet and dry type ash systems for power plants. Wet ash system is can be utilized for Bottom Ash handling with water impounded hopper and jet pumps for intermittent removal.Ash collected in economiser, primary air heater and secondary air heater hoppers drops continuously through suitable vertical pipe connections to the flushing connections provided beneath each of the ...
-
by Elum Energybased in FRANCE
Elum ePowerControl PPC is a power plant control and monitoring system (SCADA) designed for large-scale solar power plant applications. It can integrate a solar power plant with a battery storage system (BESS) and several diesel generators. ePowerControl PPC is a fully customized solution, tailored to the specific needs of the projects (control algorithms and network code). The ePowerControl ...
-
Manufactured by Aces Processbased in TURKEY
Aces Process is a recognized leader in the design, fabrication, and supply of high-performance shell and tube heat exchangers. We leverage cutting-edge technology and engineering expertise to provide innovative solutions that optimize heat transfer efficiency across various industrial ...
-
Manufactured by Bevi ABbased in SWEDEN
PLC controlled excitation equipment can be delivered separately when modernizing e.g. hydroelectric power plants. Our equipment is adapted for different types of power regulations and feeding to the exciter or directly to the generator slip rings. Different types of rotor monitoring can be built into the ...
-
Manufactured by Caloperm GmbHbased in GERMANY
Calopyx is a compact, totally welded, gasket-free plate heat exchanger that is suitable for operation with gases, liquids, and liquid gas mixes with phase transitions. The maximum operating pressure is 250 bar. The minimum and maximum temperature is limited by the used material. Calopyx operates in a tmeperature range between -200 °C and 1050 °C. The application range of Calopyx is ...
-
Manufactured by MTR Carbon Capturebased in USA
Membrane Technology and Research, Inc. (MTR) offers an advanced CO2 capture solution specifically designed for natural gas combined cycle (NGCC) power plants. This system utilizes a selective exhaust gas recycle (S-EGR) configuration that leverages incoming combustion air as a sweep to pre-concentrate CO2 from 4% to around 20%. This pre-concentration is achieved with minimal energy input, ...
-
Manufactured by Zhejiang Sandi Electric Co., Ltd.based in CHINA
The PV solar charge controller is a smart device which designed for the large-scale photovoltaic off-grid power generation system. The controller can control multi-line solar arrays matrix and achieve the battery groups charging and discharging functions, in accordance with the trend of the battery terminal voltage automatic control PV arrays turn on or cut away, not only can take full advantage ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Machines to be applied in large, typically coal-fired power plants. Leading edge technology, both in mechanical and aerodynamic design ensures the best efficiency and reliability either in USC or SC configurations. Full arch admission and full reaction ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Ansaldo Energia reheat steam turbines portfolio includes machines from two to five cylinders, capable of meeting a wide range of steam cycles, site conditions and operating modes for several applications, both in 50 and 60 Hz market, such ...
-
Manufactured by Air Systems Ltd. (ASL)based in INDIA
Supply of Cast Basalt Pipes and Elbows: We take this opportunity to introduce ourselves as a leading supplier of different sizes of Cast Basalt pipes and Elbows for Ash handling System. Because of wear abrasive resistance qualities, Cast Basalt pipes and fittings are always selected by Coal fired power plants for Ash Piping Systems, even for sea water application. We are in a position to supply ...
-
Manufactured by Mannesmann Line Pipe GmbHbased in GERMANY
Applications include the transportation of media at elevated temperatures, notably hot steam pipes in power plants and piping systems for the chemical and petrochemical ...
-
Manufactured by Xiamen Photons Solar Technology Co..Ltdbased in CHINA
Flat Roof Ballast Solar Mounting System makes a light-weight solution for all flat rooftop solar PV power plant ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you