Steam Turbines Equipment Supplied In Asia & Middle East

ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...

For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...

ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...

ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...

The largest single-stage turbine of Iran Nasb Niroo, INNCO 2TY turbine meet or exceed API611 standard, which is available with a maximum power of 6440 hp (4800 kW). This turbine can also be used as Back Pressure Turbine and Condensing ...

Backpressure turbines can either be single-stage or multi-stage which are often used in industrial plants, the turbine mainly serves as a reducing station between the boiler and the process steam ...

Since the Steam Flow Rate is usually fixed by your factory’s requirement, it is recommended to opt for a Boiler that produces steam at a higher pressure and temperature (by superheating) than what is strictly necessary for your factory's operation. Although the fuel cost for running this Boiler will increase marginally, the cost savings by way of electricity generation from your Steam ...

The turbo set consists of a back-pressure turbine with an asynchronous or synchronous generator. The entire turboset designed as a compact unit installed on a common base frame requires minimum maintenance. This equipment can also replace a pressure reducing valve to utilize pressure drop of steam for electric power ...

INNCO BSY turbine according to API611 standard is available in different models with a maximum power of 400 hp (300 ...

LAWI Engineering’s innovative steam power plant concept – the LAWI EtaPlant-C- is an outstanding breakthrough in the economical and ecological use of solid biomass and other solid waste fuels such as MSW. In combination with high-grade plant components, the LAWI EtaPlant -C achieves an unsurpassed net-efficiency up to 30 % electrically. Process steam extraction with a heat and ...

Arani Power Systems Limited supplies Turbo-Generator packages consisting of Steam Turbines, Generators, Gear-boxes, Condensers, Heat exchangers, Ejectors, Lube Oil System etc., which comply with various national/international standards, procured from reputed business partners. Seamless integration of the auxiliaries is done by Arani Power Systems ...

With turbine exhaust pressure a vacuum, the condensing multistage turbine is a high-efficiency, high output model capable of fully converting the thermal energy of steam to velocity, without loss. This series of products are known as 'multistage' steam turbines and are characterized by two or more rotor discs mounted on the shaft. The number of stages and the average pitch circle diameter (PCD) ...

The energy found in the live inlet steam is expanded below atmospheric pressure (vacuum) and is utilized by the condensing turbines. Finally, the steam is vacuum-exhausted from the turbine to the surface condenser, where the exhaust steam’s latent heat is transferred to the cooling water. This is, in turn, returned to the boiler as feedwater and these condensing turbines are straight ...

Extraction cum Back Pressure turbines, which are used in process industries, can be single or multistage. Steam is usually used in several industrial processes at different pressures and temperatures. Also, steam fullfills the power demands of the ...

A captive power plant also called auto producer or embedded generation is a power generation facility used and managed by an industrial or commercial energy user for their own energy consumption. Captive power plants can operate off-grid or they can be connected to the electric grid to exchange excess generation, as is the case with us. Captive power plants are generally used by power-intensive ...

Air-cooled heat exchangers may be applied when water is not available or required heat removal can be achieved with an air-cooled heat exchanger. Air-cooled heat exchangers are available in a range of finned tube designs, including electrically driven air blast ...

Haiqi can be flexibly configured according to the energy demand of customers. It can also focus on miniaturized skid-mounted design to reduce the customer's overall EPC cost and help customers use energy ...

The condensing turbines take high-pressure steam, expand it in turbine nozzles and blades, and exhaust it to a condenser at lower than atmospheric pressure. It is principally used when power must be generated with minimum steam consumption. The condensing turbine may also have bleed points (uncontrolled extractions) to satisfy steam demands at medium intermediate pressures. This provision is ...

The extraction condensing turbines are used when a constant pressure steam flow has to be extracted for process purposes. The constructional characteristics of these turbines are very similar to condensing turbines From the second admission valve chest it is possible to inject low-pressure steam, available in the plant to supply the power required by the plant. These turbines are typically ...

Series TVP vacuum oil purifier is special designed for turbine oil, lubricating oil and cooling oil to removing a large amount of moisture and impurity. Such as power plants, power station steam turbine in the process of running, moisture, dust and impurities will be mixed in the turbine oil, will accelerate the oxidation of oil, and changed with foam, fouling and oil sludge, cause the oil ...