Geothermal Equipment & Supplies In Ukraine

Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

A versatile power-to-heat solution from Bosch for local and district heating, building heating, process heat or as redundancy for other energy generators. - Generating heat 100 % electrically – without any flue gas - Reducing CO2 emissions: Using surplus power from photovoltaics, hydropower and wind power - Electric heat system from a single source and simple system integration - Fast ...

Fluorotherm™ shell and tube heat exchangers are used for in-line heating and cooling applications for corrosive and ultrapure fluids. These units have been designed with efficient heat transfer as the primary purpose, offering a baffled cross flow heat exchanger. Our shell and tube heat exchangers are commonly used for oil refinery and chemical processes applications, and while they're ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...

Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...

The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...

Pulling force: 51 tons @ 4,000 psi. Piston area: 25.13 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 138 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

From the Vertical Turbine family and by using some technical modifications on some of standard VTP pump parts; Layne Bowler has introduced Geo Line Brand, Geothermal ...

geoKOAX is a large volume coaxial probe with high annual performance figures The geothermal heat storage of geoKOAX, higher flow temperature to the heat pump and decoupling of the operation of the heat pump lead to high annual performance ...

When the enthalpy level of your heat source is not enough or the size of the application is too small for a steam power plant, the organic Rankine cycle is the best solution for you. The organic Rankine cycle has a plant configuration similar to that of the traditional steam Rankine cycle. The thermodynamic principle at its basis is the same, but its advantages are based on the differing ...

Cogeneration is the simultaneous generation of electricity and useful heat from a single process involving significant savings in primary energy and the subsequent reduction in emissions of greenhouse gases. Simultaneous generation of electricity and thermal energy is energy produced at the point of consumption, preventing transmission grid losses, with potential energy efficiency of up to ...

We are a power dependent culture and that mode of existence is not changing. To survive buildings must waste nothing and gain everything from naturally occurring resources. Heating, cooling, cooking, fuel for your vehicle, and power from your home is generated locally and exported whenever ...

Sage is the only Geopressured Geothermal Systems Player in the World. Harnessing the Earth's Heat: Sage Geosystems targets optimal temperatures (100-250°C) at depths accessible through existing oilfield technologies, making geothermal quickly and easily scalable. ...

HammerDrum develops compact, electrically-operated drilling technology for deep geothermal drilling, aimed at significantly reducing construction site space and operational costs. The technology consists of a 6-meter-long drill that is directly lowered into boreholes via a steel cable. Once at the bottom, it secures itself with a gripper and uses a striking rotational mechanism to drill ...

The Variable Phase cycle is a patented power system that generates power from waste heat and geothermal resources. The Variable Phase Turbine enables an efficient system for waste heat recovery and geothermal power ...

Air source heat pumps absorb heat from the outside air This is commonly used to heat radiators, underfloor heating systems, or warm air convectors and hot water in your premises. An air source heat pump extracts heat from the outside air in the same way that a fridge extracts heat from its inside. It can extract heat from the air even when the outside temperature is as low as minus ...

The K21 engine controller is designed for the off-road stationary diesel engine market. It is a cost effective entry level control panel. The controller’s primary function is the management of your diesel engine. The software and hardware are designed to be simple and easy to use. The K21 is used in the following in a basic application: waste water de-watering, irrigation pumping, ...

ORC POWER+ features patent-protected rotating twin screw expander. The rotary expander produces electricity transformed from a source of low-temperature waste heat. Installing the POWER+ offers a potential alternative to utilization of waste heat and a very attractive payback ...

Smaller T models are especially common in pieces of real estate suffering from severe lack of space or where the existing heating system is to remain as a parallel/back-up system to the ground source heat pump. The largest T models are well suitable for pieces of real estate characterised by large heated area and/or especially high hot domestic water consumption. You can get ground source heat ...