Geothermal Equipment & Supplies In USA

A versatile power-to-heat solution from Bosch for local and district heating, building heating, process heat or as redundancy for other energy generators. - Generating heat 100 % electrically – without any flue gas - Reducing CO2 emissions: Using surplus power from photovoltaics, hydropower and wind power - Electric heat system from a single source and simple system integration - Fast ...

Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

Specac’s Electrical Heating Jacket is designed to allow the study of solid and liquid samples over a temperature range from ambient to circa 250°C, via transmission spectroscopy ranging from the Far UV through to the Far IR. The variation in temperature is achieved by heating the Electrical Heating Jacket from its dedicated 30-volt supply 4000 Series power controller whilst a particular ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...

Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...

The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...

Fluorotherm™ shell and tube heat exchangers are used for in-line heating and cooling applications for corrosive and ultrapure fluids. These units have been designed with efficient heat transfer as the primary purpose, offering a baffled cross flow heat exchanger. Our shell and tube heat exchangers are commonly used for oil refinery and chemical processes applications, and while they're ...

Pulling force: 51 tons @ 4,000 psi. Piston area: 25.13 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 138 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...

From the Vertical Turbine family and by using some technical modifications on some of standard VTP pump parts; Layne Bowler has introduced Geo Line Brand, Geothermal ...

geoKOAX is a large volume coaxial probe with high annual performance figures The geothermal heat storage of geoKOAX, higher flow temperature to the heat pump and decoupling of the operation of the heat pump lead to high annual performance ...

When the enthalpy level of your heat source is not enough or the size of the application is too small for a steam power plant, the organic Rankine cycle is the best solution for you. The organic Rankine cycle has a plant configuration similar to that of the traditional steam Rankine cycle. The thermodynamic principle at its basis is the same, but its advantages are based on the differing ...

Cogeneration is the simultaneous generation of electricity and useful heat from a single process involving significant savings in primary energy and the subsequent reduction in emissions of greenhouse gases. Simultaneous generation of electricity and thermal energy is energy produced at the point of consumption, preventing transmission grid losses, with potential energy efficiency of up to ...

We are a power dependent culture and that mode of existence is not changing. To survive buildings must waste nothing and gain everything from naturally occurring resources. Heating, cooling, cooking, fuel for your vehicle, and power from your home is generated locally and exported whenever ...

Sage is the only Geopressured Geothermal Systems Player in the World. Harnessing the Earth's Heat: Sage Geosystems targets optimal temperatures (100-250°C) at depths accessible through existing oilfield technologies, making geothermal quickly and easily scalable. ...

Most geothermal installations in Massachusetts are vertical closed loop systems that involve drilling. We only work with drilling companies who have experience in geothermal installations in Massachusetts. In fact, our drillers have installed literally thousands of geothermal, drinking water, and irrigation wells throughout the state. An experienced driller will have knowledge of the bedrock and ...

HammerDrum develops compact, electrically-operated drilling technology for deep geothermal drilling, aimed at significantly reducing construction site space and operational costs. The technology consists of a 6-meter-long drill that is directly lowered into boreholes via a steel cable. Once at the bottom, it secures itself with a gripper and uses a striking rotational mechanism to drill ...

The Variable Phase cycle is a patented power system that generates power from waste heat and geothermal resources. The Variable Phase Turbine enables an efficient system for waste heat recovery and geothermal power ...

The FLEXI-POWER™ High-Pressure Gas Compressor is used for high pressure testing, alternative refueling, high flowrate research applications and heavy duty industrial applications. Standard units are available for discharge pressures of 10,000 to 60,000 psig (70 to 415 MPa) in frame sizes from 10 to 100 hp (7.5 to 75 kW). Two-stage FX compressors typically operate with inlet pressure ranges ...

Standard Features: Refrigerant Based (Water-Free) Geothermal Heat Pump System, Two-Stage Forced Air DX Heating and Cooling, Closed Loop Geothermal Heat Pump, Water-Free Copper Ground Loop, Smart Logic Controller, Zoning Friendly Capabilities, Dual Fuel Friendly Controller, Enhanced Compressor Protection, 2 Stage Controller, Standardized Mechanical Refrigerant Controls, High-Efficiency Copeland ...