Hydro Energy Equipment Supplied In Czech Republic

More than 44 Francis pump turbines were realized at CDK Blansko since 1904 with output more then 6 000 MW. The first deliveries of Francis pump turbines were made over 40 years ago. Turbine, pump and synchronous condenser operation in the direction of rotation of the turbine or the pump. The operation range is shown in the Q/H diagram. Runner diameter up to 7, 000 mm. Teh reversible Francis ...

Synchronous generators are among the TEM division’s products in highest demand. They are suitable for all types of hydro turbines with outputs up to 30,000 kVA. In spite of the product’s common characteristics,it is a customized product manufactured according to requested parameters for each specific application. The machine design is worked out by a team of experienced designers. A ...

They are designed for heads from 30m up to 500m. Are offered in horizontal and vertical arrangement and only with the direct connection to the ...

Runner Diameters 500 mm to 1800 mm. Number of Jets 1, 2 or 3. Head Range 50 to 1000 meters (165 to 3300 feet). Flow Range 0.1 to 6 cms (4 to 212 cfs). Power Output 30+ MW. Transmission Runner Assembled to Generator or Turbine ...

Runner Diameters 550 mm to 5500 mm. Number of Runner Blades 3, 4, 5 or 6. Head Range 1.5 to 35 meters (5 to 115 feet). Flow Range 1.2 to 200 cms (45 to 7060 cfs). Power Output Up to 20 ...

Regulation of the runner with runner blades fixed. Is the most frequently used machine for newly constructed small head hydropower plants. It is also used in the renovation of older plants originally equipped with vertical Francis turbines, which often achieves a better flow usage. The advantage is the low cost of the equipment. Installation is ether with a drive belt or directly connected to the ...

Runner and guide wheel regulation. Designed as a monoblock and is used primarily in reconstruction of older plants. The guide wheel performs the function of both the operational and closure system solved by pressure accumulator. Installation is only with direct connection to the generator. Turbines are controlled by the PLC control system and the mechanical part is controlled by ...

High-head Pelton turbines brought to perfection. High efficiency (90% or more), no water hammer effect, increased safety of operation, stunningly simple installation and maintenance, minimal civil works, and three different layouts (vertical, horizontal and compact-vertical). All tailor-made for every project and exclusively from components from the European ...

Francis turbine is applied for middle/ high Heads and moderate/high Discharges We design our Francis turbines with adjustable Guide Vanes during operation ensuring optimisation of efficiency at varying ...

Pelton turbine is non-pressure turbine suitable for very high heads and low discharge. Water is supplied by nozzles equipped with adjustable needles and deflectors to the runner ...

InteliSys NTC Hybrid is a controller for hybrid microgrid applications, supporting the combination of renewable energy sources with gen-sets. The controller can be used for both on-grid and off-grid applications to help optimise the use of renewable energy and reduce your carbon ...

Small hydro power plant is technically exploitable potential, kinetic or thermal energy of all waters on earth. This is immediately after the second most used biomass renewable energy source. Most are nowadays used in hydraulic power conversion to electricity. Small hydro power is the designation for hydroelectric power plants with installed capacity up to 10 MW, including (NB. The European ...

Synchronous generators have been optimized for outputs up to 30,000 kVA, they feature high efficiency and precise speed regulation. A new innovation is our generator with permanent magnets with outputs up to 4,000 kVA. Thanks to the progressive design, the machine is 30 % lighter than machines with a wound rotor. With excellent efficiency, easy installation and longer service intervals, the ...

Since 1904 CKD Blansko has manufactured more than 427 Kaplan turbines and they operate at 111 sites. Their total output amounts more than 5346 MW. We provide horizontal or vertical, spiral or flume arrangement, bulb, pit or S-type with fixed or regulated blades and/or wicket gates. All types of Kaplan turbine used for operation within the range shown in the Q/H diagram. Runner diameter up to 10 ...

Since 1904 CKD Blansko has manufactured more than 249 Francis turbines and they operate at 89 sites. Their total output amounts more than 5 334 MW. Francis turbines are delivered with high-quality self-lubricating bearings as standard. These bearings have higher specifications than the original bronze bearings and are moreover environmentally – friendly. Vertical as well as horizontal types ...

Runner Diameters 500 mm to 2500 mm. Number of Jets 3, 4, 5 or 6. Head Range 50 to 1000 meters (165 to 3300 feet). Flow Range Up to 10 cms (353 cfs). Power Output 30+ MW. Transmission Runner Assembled to Generator or Turbine ...

Runner Diameters 1050 mm to 5500 mm. Number of Runner Blades 3 or 4. Head Range 1.5 to 12 meters (5 to 39.5 feet). Flow Range 15 to 150 cms (530 to 5340 cfs). Power Output 400 kW to 8 MW. Transmission Belt Drive or Parallel ...

Runner Diameters 1050 mm to 2500 mm. Number of Runner Blades 3 or 4. Head Range 1.5 to 12 meters (5 to 39.5 feet). Flow Range 5 to 45 cms (180 to 1590 cfs). Power Output 100 kW to 3 MW. Transmission Direct Drive, Belt Drive or Bevel ...

Runner and guide wheel regulation. Designed as a monoblock, and is used primarily in reconstructions of older plants. Guide wheel performs the function of both the operational and closure system which is controlled by gravity or hydraulic pressure accumulator. Installation is either with transfer belt or with a direct connection to the ...

Runner Diameters 710 mm to 3000 mm. Number of Runner Blades 4, 5 or 6. Head Range 2 to 35 meters (6.5 to 115 feet). Flow Range 2 to 60 cms (70 to 2120 cfs). Power Output 30 kW to 20 MW. Transmission Direct ...