Hydrogen Energy Equipment & Supplies In Lesotho

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 0.950 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Smallest cell ...

The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...

The G6S CVM solution was specially developed for cell voltage monitoring in series applications. It is scalable, allowing both single cell measurements and voltage measurements across two or four cells. The measurement modules are supplemented by a target market-specific head module, which is equipped with the data interfaces prevalent in the respective target market. The head module also offers ...

Cell scanning: Single Cell SC (1C). Contact design: 0.4 mm spring wire with W-shape. Contact bearing: In printed circuit board two-sided. Interlocking type: Vertical-Pressure-Lock. Contact pitch min.: 1.200 mm. Pinhole/ Geometry: Pinslot rectangular, 1 mm depth. Bipolar plate material: Metal. Connection type: Wired. Benefit (USP): Extremely flat design („installation space neutral CVP ...

Cell scanning: Single Cell SC (1C). Contact design: 2mm MultiLam. Contact bearing: In housing body, floating. Interlocking type: Positive Lock in plastic body. Contact pitch min.: 2.000 mm. Pinhole/ Geometry: Rectangle 2x2 mm. Bipolar plate material: Graphite. Connection type: Wired Benefit (USP): Commercial contact with very good availability. Robust design. Application: Series application, ...

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with 1/2 A-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Vertical-Pressure-Lock. Contact pitch min.: 2.350 mm. Pinhole/ Geometry: Pinslot V-shaped, 0.8 mm depth. Bipolar plate material: Graphite. Connection type: Flexcard. Benefits (USP): Direct mechanical and electrical connection to the ...

Cell scanning: Double Cell DC (2C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 2.030 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Design for ...

AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...

Cell scanning: Mixed: 29x SC (1C), 100x TC (3C). Contact design: 0.4 mm spring wire with 1/2 A-shape. Contact bearing: In PCB one-sided with redundant contact pin. Interlocking type: Vertical-pressure-lock. Contact pitch min.: 1.715 mm. Pinhole/ Geometry: Pinslot rectangular, 1 mm depth. Bipolar plate material: Graphite. Connection typ: Flexcard. Benefit (USP): Modular positioning and locking ...

Cell scanning: Single Cell SC (1C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing. In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole. Contact pitch min.: 1.015 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Wired solution allows CVP connection even at ...

The HB-SC-50 liter Hydrogen Fuel Cartridge is designed to be used as a standard storage for our portable FID based instrument and to act as a back up hydrogen source at room temperature. This hydrogen storage system is based on the latest achievements in solid metal hydride technology of AB5-type alloys as well as on unique techniques of alloy loading. It allows to store and release the gas at ...

The highly efficient UT-M is a three-pass boiler designed for 750 to 19,200 kW of heating at up to 16 bar. Its various output sizes and temperature ranges up to 190 °C enable flexible operation for countless process heat and heating ...

The biogas compressor series VMY is an oil-injected screw compressor in 3 sizes for volume flows. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants (BGIP) for the compression of biomethane to inject into gas grids. ...

The heating boiler UT-L offers high performance and is extremely compact. The design complies with the Gas Appliances Regulation. - Very high efficiency up to 105% for optimised energy costs - Compact design for easy positioning and effective use of heat - Flexible application and low return flow temperature of 50 °C possible - Specific control concept and optional real-time monitoring - ...

BGEm by ELI BioScience is a unique blend of methane forming bacteria called acetolactic methanogens as wall as hydrogen oxidizing methanogens. These microbes have been Isolated and stabilized in BGEm for their effectiveness to convert acetate and methyl to methane. Hydrogen oxidizing methanogens aid in producing hydrogen ions which react with available carbon dioxide to increase methane ...

The BL-220 Metal Hydride Hydrogen Storage Container, offered by Element One Energy, is a state-of-the-art solution for solid hydrogen storage. Utilizing the innovative SOLID-H™ technology, this container allows for efficient hydrogen storage and release. The discharge rate for the stored hydrogen depends on various factors, and while quick discharge is possible with enhanced heat transfer ...

Monolith’s methane pyrolysis makes Clean Hydrogen real, affordable and scalable. Right now, at our facility in Hallam, Nebraska, we’re producing Clean Hydrogen at a commercial scale. With the completion of our expanded facility, Monolith will be operating at a global scale, producing carbon-zero hydrogen to provide the key to the energy transition to a decarbonized world. ...

Based on PPtec HT®- PEM, customized HT-MEA products that can be mass-produced with an active area of 25-400 cm2. The products features excellent performance with good consistency and ...

Helbio has developed a versatile range of Hydrogen Generators meticulously engineered to meet the rigorous demands of small-scale hydrogen production. These systems utilize a variety of fuels, including Natural Gas, L.P.G, or Biogas, to deliver clean, quiet, and highly efficient hydrogen generation, ensuring uninterrupted operation with extended service intervals. Our standard models, HHG-20, ...

Dolphyn is a world leading patented process technology. It uniquely builds on the most advanced technologies from the floating offshore wind and hydrogen sectors. The production of offshore green hydrogen. A desalination unit first removes salts and other impurities from the seawater before it goes into the electrolyser. Wind power from the turbine generates the electricity to power the ...