Gas Engine Equipment & Supplies

HoSt acts as a turnkey supplier of (air blown) fluidized bed gasifier plants. By means of gasification biomass fuels can be converted to a combustible syngas, which can be cleaned and used in several kinds of power generation equipment. Gasification is a feasible technology for thermal conversion of waste, meeting the strict emission ...

WT ENERGY SMEA provides landfill gas (LFG) collection systems for existing landfills, designed to capture the gas produced by decomposing waste before it impacts the environment, and utilize it as a fuel source for electrical ...

The GasiFlex 50 - power unit built into 20ft container is a unique“3-in-1” solution of a robust gasification, a co-generation, a dryer. The high degree of automation enables the packaged technology to be deployed without constant staff and to be monitored constantly by remote surveillance. The unique biomass based patented technology accepts the input fuel materials with high ...

Bio-gas may also contain small amounts of nitrogen or hydrogen. Contaminants in the bio-gas can include sulphur or siloxanes, but these contaminants will vary, depending on the organic material being used. This methane gas (bio-gas) can be harnessed for a reliable source of sustainable ...

With this gasifier, we present an economical and eco- friendly solution to convert woody biomass /agricultural wastes like coconut waste, rice-husk etc. into a combustible gas that can be further used in a number of applications. We offer two types of gasifier for bioMass viz, updraft and downdraft gasifiers. In today's time, the fuel generated from the gasifier can be used in ...

Eneraque delivers state-of-the-art biogas generator and waste gas utilization. As leading providers and system integration experts, we’ll handle the entire process — so you get a complete gas-to-energy solution designed, manufactured, and installed to your site requirements. Eneraque has full comprehensive capabilities and extensive experience in all ...

Cold spot corrosion problems and mechanical failures limit heat recovery. Polymer economisers are corrosion resistant and designed for leak proof thermal ...

By combining a rapid in-vessel composting technology, with an intermediate materials recycling facility (MRF) and a back-end energy recovery technology such as gasification/pyrolysis, it is possible to have the best of both recycling and energy recovery. The composting system releases and cleans the plastics and metals from the wet organic materials ready for the MRF to separate the biodegradable ...

Ambitermo designs and installs electric power production systems, combined with the production of thermal ...

The waste-heat boilers of the WH range recover energy from hot flue gases as heat source without any supplementary combustion. These boilers are of the monobloc type, with fully automatic operation and are provided with all accessories required for quick commissioning.The WH range is characterized by a great flexibility of design and use; the boilers are designed specifically to meet any ...

The concentrated biogas – close to 100% methane is called ‘biomethane’ or ‘renewable natural gas’ (RNG). This gas can be used as a vehicle fuel or injected into the gas distribution ...

Gases created as a ‘free’ by-product during steel production processes serve as an attractive energy source option for efficient power generation. In addition to the economic benefit, using these gases as engine fuel reduced industrial CO2 emissions and saves natural energy ...

The digester employs an advanced anaerobic reactor, featuring robust load resistance and even temperature distribution, and addresses common issues like scum formation and gas blockages. Constructed from Q235B steel plate with epoxy coal asphalt paint or electrophoresis for preservation, it uses an internal circulation stir method to ensure thorough mixing of materials. The ...

Preheat or process water from waste heat, three to seven percent average fuel ...

ORC POWER+ features patent-protected rotating twin screw expander. The rotary expander produces electricity transformed from a source of low-temperature waste heat. Installing the POWER+ offers a potential alternative to utilization of waste heat and a very attractive payback ...

These crops are typically ensilaged and stored in clamps or hoppers and are continuously fed into the digester throughout the year. In India biogas plants may be called gober gas ...

Biomethanization process is the gasification process by simulating the wet / dry natural decomposition environment of the organically degradable part of domestic wastes, animal wastes, farm wastes and industrial wastes in a dry / airless environment. The reason for the evaluation of organic wastes in biometanization facilities is to extend the life of the waste disposal sites (landfills), to ...

Trigeneration combines a highly efficient and low-emission 2G CHP power generation with an absorption chiller. In some instances the heat utilisation of a Cogeneration system is highly seasonal. With the addition of an absorption chiller, additional waste heat from the Cogeneration system can be converted into chilled water for use in cooling processes. Evo’s absorption chillers offer an ...

The cultivated renewable raw materials are ensiled in a substrate storage and there stored until they are used in the plant. The most commonly used are corn silage, grass silage, manure, slurry and other renewable resources. All organic substances are introduced through the substrate entry. This mixing tank is connected with screw conveyors to the fermenter. These screws then dose very precisely ...

Using a combined heat and power (CHP) or cogeneration plant in a hospital is an ideal way of achieving improved energy efficiency and reduced carbon emissions. Its utilisation helps a hospital’s limited financial resources go further. Natural gas is a clean-burning low carbon emission fuel. A CHP plant facilitates the high efficiency use of this fuel, by recovering not only ...