Hydropower Turbine Equipment & Supplies

Francis turbines have been around for 170 years, and have more installations than any other type of turbine in the world today. Numerous designs offering variations in runner height, crown and band diameters, number of buckets, etc make Francis turbines a versatile option for a wide range of hydro projects with heads as low as 12 meters to as ...

This product have high reliability and durability high ...

The T Ultra Low Head turbine (T-ULH) is the most powerful open flume turbine built by Nautilus. This unregulated design produces from 500 watts to 3,300 watts with a head range from 1m to 3.7m. Often two or three units are installed to match streamflow variation or the T-ULH is installed in combination with the Regulated CMC. ...

In the last years, Franco Tosi Meccanica has consistently delivered to the market important projects on a global ...

The Pelton is an impulse type water turbine invented by Lester Allan Pelton in the 1870s. Peltons are the preferred turbine for hydro-power where the available water source has relatively high head at low flow rates. The jet(s) of water strike the splitter edge of the double bucket (runner) and is turned through an angle of nearly 180° before falling under ...

The axial turbines are designed for projects with low and very low heads with a strong flow variation. VAPTECH offers mainly the classic vertical shaft Kaplan turbine with 3 to 6 runner blades and with double regulation. For runner diameters up to 1400 mm we use a steel spiral casing and for bigger runner diameters we recommend a concrete spiral casing. ...

This turbine is installed on the bed of the river or canal. Especially suitable for installation in canals or behind traditional hydro power ...

The Hydro Energia own hydroelectric Turbines technology is based on 25 years long experience in design and production of the main type of turbines such as: Kaplan, Francis and Pelton from 100 kW up to 40 MW, each ones with various setting according to the needs of our Costumers. ...

Pump turbines can respond almost instantly to sharp variations in power demand.We are able to provide a solution adapted to our customers’ specific needs -- wherever they are located in the world.Our complete line of pump turbines are suited for heads ranging from 5 m to 1,200 m with production potential ranging from 50 MW to 500 MW for all types of ...

Thordon SXL offers the lowest coefficient of friction, superior adhesive wear performance and good resistance to wear resulting from third particle ...

The unique ClydeUnion Pumps TWL™ pump is a single wheel steam turbine, two-stage pump, where both the turbine and impellers are mounted on a rigid shaft, supported by a central bearing assembly integral within a monobloc turbine/pump ...

The hydraulic turbine is a machine that turns hydraulic energy into mechanical energy, with a conversion yield of approximately 90%. This mechanical energy is then converted into electrical energy by means of an alternator. ESPE turbines are directly engineered by our R&D Department. ...

Filtervac Pioneered Oil Re-Refining Green Technologies and proudly serving the world Since 1983, tracing roots back to 1885. Filtervac Turbine Oil Purifier (Model VPL) utilizes a vacuum dehydration process to remove emulsified and dissolved water from turbine oil as well as fine particulate and gasses. The Turbine Oil Purifier system are ...

With more than 300 bulb units installed worldwide, Alstom has outstanding knowledge and experience in design, manufacturing, installation, commissioning and management of complex bulb projects, whatever the environmental ...

Design principle and range of use: Pelton turbines with either vertical or horizontal shaft are intended for use of water energy at very high head (up to 1500 m) and relatively low discharge. Pelton turbine is an impulse machine that transforms the potential energy of water into kinetic energy in a form of a water jet, which impacts and drives a Pelton ...

The tube turbine power range is from 20 to 700 kW. Units have a direct drive configuration where the turbine and the generator are on the same shaft having common bearings and ...

The turbines are characterized by a simple, robust design that ensures reliable operation with minimal maintenance. The welded steel-structured spiral housing and the stay ring form a compact unit with the suction-pressure connections and the support legs, and the lifting tabs. ...

IDEAL has been a leading supplier of low, medium and high-speed synchronous and induction generators for over 115 years. With thousands of these generators in operation around the world, our machines have proven their reliability in virtually all types of applications and environments, including gas, steam, and geothermal. ...

Description: Used for breathing into new oil and handling unqualified turbine oil, especially for the emulsified turbine oil as mixing with the water and air because of seal problem, and for dehydrating, removing impurity substances, demulsifying for lubricating oil. Destroys emulsify oil thoroughly, not easy to emulsify again. ...

In a conventional power plant, thermal or potential energy is converted to mechanical energy, which in turn must be converted to electrical energy. A steam, gas or water turbine is used to drive a rotating shaft, which in turn drives a generator, producing electricity at a relatively low voltage (typically in the range 15kV-24kV). This low voltage must be transformed to a higher ...