Power Factor Equipment & Supplies

The SIRAX BT5400 is used to measure and convert Active, Apparent, Reactive Power, Phase Angle & Power Factor of a Single phase or Three phase AC System with balanced or unbalanced load into an proportional DC current or voltage output ...

The SIRAX BT5400 is used to measure and convert Active, Apparent, Reactive Power, Phase Angle & Power Factor of a Single phase or Three phase AC System with balanced or unbalanced load into an proportional DC current or voltage output ...

To prevent resonance phenomena caused by harmonic content in the power supply system, filter circuit reactors are required to set up detuned compensation systems. Here, high linearities guarantee the necessary functional stability even in the overload ...

The multicomp F144-3Ph-…-3 reactive power controller automatically works in 4-quadrant operation (generator operation), i.e. even with return feed into the energy supplier network, missing compensation power is detected and compensated without any problem. Through the integrated temperature measurement input, the ambient temperature in the reactive ...

The microcontroller-controlled multicomp F144-xxx-3 records all network data relevant to the control of small systems via A/D transformer inputs. After calculating the required compensation power to achieve the desired target cos φ, the available capacitor stages are automatically switched on or off with a few switching operations. Programming is menu-assisted and is performed ...

Controlled compensation system with thyristor ...

CMMT single phase capacitors are the result of continual innovation and technological development of materials and production cycles, featuring extra low losses, high reliability and they are applicable to various ...

From 50 to 3000 rpm Exciter equipment rotor stator Diodes plate Regulation control by Stress automatic mode (AVR) Manually or field current (FCR) Power factor Reactive power (VAR) ...

Synchronous condensers are fundamentally a synchronous motor that is not connected to any driven load. Once started and connected to the electrical system it operates at full leading power factor to put VAR’s into the network to support the system voltage or maintain the system power factor at the desired ...

Increases Electrical Capacity. Cools Overheated Lines and Panels. Lowers kW Consumption, Demand & KWH. Improves the Facility’s Power Factor. Helps Meet IEEE‐519‐1992 Standards. Lasts for 140,000+ Hours of ...

power saving system and power factor correction save energy by from 20 to ...

The reactive power controller obeys the network power factor and the desired power factor value adjusted regulator by switching on and off capacitor stages of correction devices. In that way it performs its desirable function of reactive power ...

Inside Aluminium Heatsink for better Heat Dissipation, Polycarbonate Diffuser, Surge Protection upto 4kV, High Power Factor power supply used greater than 0.9, High Lumen Performance of Upto 100 Lm/W, LED’s used of upto 140 ...

Inside Aluminium Heatsink for better Heat Dissipation, Polycarbonate Diffuser, Surge Protection upto 4kV, High Power Factor power supply used greater than 0.9, High Lumen Performance of Upto 100 Lm/W, LED’s used of upto 140 ...

ELECTRICAL; FREQUENCY : 50 Hz, VOLTAGE : 400/230 V, PRIME : 10 kVA / 8 kW, STAND-BY : llkVA/9kW, Rated Speed : 1500RPM-50HZ, Phase : 3, Power Factor : ...

ELECTRICAL; FREQUENCY : 50 Hz. VOLTAGE : 230 V. PRIME : ll,2kVA/10kW. STAND-BY : 12 kVA / 10,8 kW. Rated Speed : 3000RPM-50HZ. Phase : 1. Power Factor : ...

Inside Aluminium Heatsink for better Heat Dissipation, Polycarbonate Diffuser, Surge Protection upto 4kV, High Power Factor power supply used greater than 0.9, High Lumen Performance of Upto 100 Lm/W, LED’s used of upto 140 ...

Inside Aluminium Heatsink for better Heat Dissipation, Polycarbonate Diffuser, Surge Protection upto 4kV, High Power Factor power supply used greater than 0.9, High Lumen Performance of Upto 100 Lm/W, LED’s used of upto 140 ...

VOLTAGE : 400/230 V. PRIME : 15 kVA / 12 kW . STAND-BY : 16,5kVA/13k\A. Rated Speed : 1500 RPM -50 Hz. Phase : 3. Power Factor : ...

ELECTRICAL; FREQUENCY : 50 Hz. VOLTAGE : 400/230 V. PRIME : 9 kVA / 7 kW. STAND-BY : 10 kVA / 8 kW. Rated Speed : 1500 RPM -50 Hz. Phase : 3. Power Factor : ...