Power Turbine Equipment & Supplies Near Michigan

Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. ...

24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...

The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...

Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...

Many industries aim to reduce their ecological footprint by minimizing energy consumption. Sulzer Hydraulic Power Recovery Reaction Turbines can be used to capture lost ...

The latest in the Guardian Electric family of flight control grips. This grip is the state of the art for fly by wire active control for today’s most advanced commercial aircraft. It is designed to eliminate the need of traditional control columns and allows designers to save space in the cockpit and create better comfort for pilots. It features leather wrapped comfort along with ergonmic ...

A wind turbine from Earth Wind And Solar Energy uses the strong Chicago winds to power up homes with as much as 100% of their energy ...

The SGT-100 gas turbine is an industrial gas turbine in the power output range from 5 to 6 megawatts (MW) which combines compact and rugged construction with advanced technology. For industrial power generation a single-shaft version of the SGT-100 is used which has a power output of 5.05 MW(e) or 5.1 MW(e). ...

The HGT400 gas turbine auxiliary power unit (APU) is the next generation derived from the RE220 family of APUs. The HGT400 APU offers an integrated system that supplies pneumatic and electric power for the aircraft while on the ground or ...

The Titan™ 250 is our most powerful gas turbine package and is based on proven technologies from other Solar Turbines models. It produces 50 percent more power in the same footprint as the Titan 130, while providing 40 percent shaft efficiency with emissions reduced by up to 30 ...

90MW Medium-Size Gas Turbine for Flexibly Meeting Load Balancing Requirements. Doosan Enerbility offers a product lineup ranging from small to large-sized gas turbines. We are also working on the development of hydrogen gas turbine technology, with the aim being to deliver both hydrogen dual-fuel and 100% hydrogen-fueled ...

Doosan Enerbility offers a product lineup ranging from small to large-sized gas turbines. We are also working on the development of hydrogen gas turbine technology, with the aim being to deliver both hydrogen dual-fuel and 100% hydrogen-fueled ...

Doosan Enerbility offers a product lineup ranging from small to large-sized gas turbines. We are also working on the development of hydrogen gas turbine technology, with the aim being to deliver both hydrogen dual-fuel and 100% hydrogen-fueled ...

In its simplest form, a 2-phase geothermal plant brings hot high energy brine to the surface. The brine flashes into steam at the lower pressure as a result. In short, the steam then flows to power a turbine, which makes ...

At Industrial Heat Transfer, Inc., we design and manufacture chilling coils for a vast array of turbine applications. Our turbine inlet chilling coils are built for longevity and performance. Choose IHT coils to keep your turbine inlet cooling system operating at maximum efficiency for years to ...

There are two fundamental steam generator designs used in commercial power systems in North ...

The Energy Ball V100 is a spherical small wind turbine with a diameter of 1 meter. The Energy Sail V10O has 6 rotor blades and is in particular suitable for installation In urban area's. Since the Energy Ball V100 does not cause any nuisance due to noise or shadow, permits are generally granted faster than comparable small wind turbines. ...

The Energy Ball V200 has a bigger diameter than the Energy Ball V100 and delivers substantially more power. The V20O has 5 rotor blades. With a diameter of almost 2 meters the Energy Ball V200 is suitable for installation in urban area's according to EU and North American legislation. Since the Energy Ball does not cause any nuisance due to noise or shadow, permits are generally ...

High pressure systems condition biogas and produce fuel to power turbines and fuel cells. These can be designed for any gas flow at pressures up to 200 psig. This same technology is used for the production of RNG as vehicle fuel or for pipeline injection. Our compression systems use a two-stage condensate removal process to protect not only the end-use equipment ...

The first IDEAL ELECTRIC branded, multi-megawatt permanent magnet synchronous generator was introduced in 2018. The air-cooled machine sets new benchmarks for power density and weight saving in mobile gas turbine power unit applications for electric hydraulic ...